EdgeRouter is a line of network routers from Ubiquiti Networks.
Questions tagged [ubiquiti-edgerouter]
37 questions
5
votes
1 answer
Disable EdgeRouter Lite GUI on DMZ interface
I'm using the Ubiquiti EdgeRouter in a SOHO network. I've configured it using the "WAN+2LAN2" wizard, without bridging the LAN ports. This sets up the three port router with eth0 assigned to the WAN, and eth1 and eth2 serving two separate subnets,…
![](../../users/profiles/272912.webp)
jsears
- 286
- 2
- 9
3
votes
1 answer
Edgerouter DNSmasq send updates to BIND
TL;DR: How do I configure the Ubiquiti EdgeRouter, running DNSmasq or DHCPd, and NSupdate, to send its DHCP leases to a central BIND server?
I have a system comprised of a few Ubiquiti EdgeRouter X's all acting as DHCP and DNS servers for a local…
![](../../users/profiles/440077.webp)
enpaul
- 202
- 2
- 13
3
votes
1 answer
What is the complement to 'set' in EdgeOS? (How do I check a value in EdgeRouter?)
This question discusses how to set the gui and ssh listening addresses in EdgeOS running on an EdgeRouter. I'd like to check my current configuration before making a change, as well as learn the syntax for checking other settings in the…
![](../../users/profiles/316107.webp)
user3.1415927
- 172
- 1
- 1
- 8
2
votes
0 answers
Routing public IP addresses to customers in a WISP setup
We have a fibre leaseline with a /29 range for our pfSense WAN port
61.179.145.40/29
So the WAN of our pfSense box is 61.179.145.42 with a gateway of 61.179.145.41.
Our ISP has also routed 61.179.144.128/25 with a next-hop of 61.179.145.42 (our…
![](../../users/profiles/173493.webp)
dynamicuser
- 137
- 7
2
votes
2 answers
Port forwarding to the router itself on Edgerouter
I recently upgraded one of my customers to a Ubiquiti EdgeRouter Lite, which is a significant improvement over their old ISP-supplied router.
To reduce the frequency of attacks against the router's web interface while still allowing remote…
![](../../users/profiles/105107.webp)
Moshe Katz
- 3,053
- 3
- 26
- 41
2
votes
2 answers
Exposing LAN with Zerotier when using Ubiquiti Edge Router X?
So I managed to install ZeroTier with the Ubiquiti Edge Router X via:
admin@edgerouter# sudo -i
root@edgerouter:~# curl -s https://install.zerotier.com | sudo bash
And got to access the Edge OS (Edge Max) interface through the ZeroTier Global IP,…
![](../../users/profiles/91127.webp)
cyberquarks
- 269
- 4
- 14
1
vote
0 answers
Comparable Ubiquiti to Cisco native vlan configuration
I am trying to replace a cisco router with a ubiquiti router. On the Cisco, you don't address the base interface. You only address the vlans. Then, you choose the native vlan and that will match the untagged vlan port that connects the switch. On…
![](../../users/profiles/146505.webp)
Brandon Bearden
- 129
- 1
- 1
- 8
1
vote
2 answers
Route traffic between two Azure site-to-site VPN locations
I have a single Azure virtual network gateway running the "Basic" VPN SKU (MainVGW) in "Route-based" mode in the Australia East region. MainVGW has two "Connections" (BR and MH) which are IPsec Site-to-Site VPN connections to two separate sites…
![](../../users/profiles/503048.webp)
ffej
- 11
- 1
- 2
1
vote
1 answer
PXE Server Implementation Issues
I have an ESXi VM running a tftpd-hpa server on the latest version of Debian 9 for the network PXE environment. For testing purposes, I configured another VM to handle DHCP on Debian 9 using isc-dhcp-server (with next-server and bootfile…
![](../../users/profiles/383435.webp)
SuperAdmin
- 209
- 3
- 10
1
vote
0 answers
OpenVPN works with TCP but not with UDP
I have two sites which I want to connect via an OpenVPN tunnel. I have the setup running using TCP as transport protocol, but as this comes with a performance hit, I want to change this to UDP. But the setup fails then.
Site A has a DSL Uplink with…
![](../../users/profiles/346141.webp)
loewexy
- 33
- 5
1
vote
0 answers
EdgeRouter IPSec Site-to-Site fails to come “up”
I've got two Ubiquiti EdgeRouters set up in different locations. I need to setup a Site-to-Site VPN so that everyone has access to the server on one location.
This is the network topology: https://i.stack.imgur.com/7WmhA.png
On the two ISP routers,…
![](../../users/profiles/429170.webp)
Thomsen1707
- 21
- 4
1
vote
1 answer
How to handle a Site-to-Site VPN one site behind a Double-NAT
Goal: Establish a Site-to-Site VPN tunnel between an office and a remote-site behind a Double-NAT connection. (e.g 4G Hotspot with a CGNAT IP)
(Remote Site Setup)
LTE Modem:
e.g Sierra Wireless Airlink GX450 - 4G Verizon LTE Hotspot / GPS
-…
![](../../users/profiles/119139.webp)
James
- 1,117
- 3
- 9
- 16
1
vote
1 answer
unable to install source route - RTNETLINK answers: No such process (IPsec / strongswan)
Basically I'm trying to connect a pfSense to an EdgeRouter via IPsec site2site.
(public ip networks obfuscated by '1.2.')
[pfsense] <-> [edgerouter]
public: 1.2.156.229/30 <-> 1.2.112.249/30
tunnel: 10.5.44.100/24 <->…
![](../../users/profiles/163165.webp)
Christoph Lösch
- 111
- 1
- 7
1
vote
1 answer
Routing LAN traffic from Edgerouter to wg0
So I've read and tried all I could find on the interwebs and I stil can't get my head around this. I'm trying to accomplish something super easy with OpenVPN on my EdgeRouter X that seems impossible with WireGuard for me: Routing all traffic from…
![](../../users/profiles/405825.webp)
pycvalade
- 111
- 4
1
vote
0 answers
Assigning a single public IP address to a VLAN with NAT
I've been assigned to be in charge of our business' networking and am a bit out of depth here.
We have a few production services running on multiple servers, currently sitting behind a NAT and a single public IP address. We separate the traffic by…
![](../../users/profiles/629463.webp)
Alex
- 11
- 1