Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [supermicro]

Supermicro is a computer hardware company headquartered in San Jose, California. They design and manufacture server equipment.

274 questions
0
votes
1 answer

supermicro server - long time for reboot

Dears, I trying to reboot supermicro server first time, and it takes long time more than 30 min and not finish yet. ram was 16G 2400T and change it to 32G 2133T is there any advice?
ghaida
  • 1
0
votes
1 answer

Initialization 91 stuck of Supermicro OEM (HPE) GPU server

I just set up HPE SX40 (Supermicro SYS-1029GQ-TVRT). The system stuck on boot with "initializing ... 91". I tried some crude test like remove all memory, and got relevant error message. So, 1)removed all pcie cards (including NVIDIA SXM2 adapter…
iPsych
  • 1
0
votes
1 answer

Cabling for SAS controller and SuperMicro BPN-SAS-825TQ

I´ve managed to get one of the SuperMicro low-end server to my lab. It is chassis 825TQ-R740LPB with a BPN-SAS-825TQ backplane. The specification document is saying, that this backplane is SAS compatible. But the server has a motherboard with only a…
Jiří Kubeš
  • 1
0
votes
0 answers

Supermicro - XFS (snumbd6d): log I/O error -5

So, We have a supermicro server with the next hardware configuration: CentOS 7 Softraid (because this supermicro configuration didn't support hardware raid..) / Partition is RAID 10 and the rest one is RAID 1 CPU: 2x AMD EPYC 7402 RAM: 512Gb DDR4…
andrei perju
  • 1
  • 1
0
votes
1 answer

Cannot access IPMI anymore. Both IPMIView and ipmitool show "Insufficient privilege level"

I got a Supermicro 5019TR-GF server recently. At first I can connect to the IPMI via IPMIView or ipmitool to control the server, but today I cannot connect to the server anymore. The ipmitool show: user@ubuntu-vm:~$ ipmitool -I lanplus -H…
user815921
0
votes
2 answers

Reset IPMI IP on Supermicro server with videocard died

Today I face a server which videoport is dead (no picture when monitor connects to even on reboot), but this server has IPMI. The problem is, the IP of IPMI is set to some dummy value (I was told that was for security reason), and now I can't change…
Alexander
  • 724
  • 2
  • 11
  • 19
0
votes
1 answer

Why does my server have a dedicated IPMI port?

My SuperMicro server has 3 Ethernet ports that break down like this: I never use the dedicated IPMI port while accessing IPMI capabilities perfectly well via LAN1 along with the installed OS. I use ipmitool on Ubuntu to set up access to the console…
codemonkey
  • 161
  • 6
0
votes
1 answer

Supermicro BMC IPMI - How to get hardware specs without OS access

This is my first post in Serverfault for the purpose of trying to get the hardware specs for our supermicro 1U rack server so here it goes: I have downloaded the IPMIView, IPMICFG, and SMCIPMI utilities ->…
line_definer
  • 1
  • 3
0
votes
1 answer

Server shutdown when stress

Today I have a little problem. I have a local server in my house, for testing and virtualization. It has a Supermicro X8DT3-LN4F board and two Intel Xeon x5680 processors. The problem is that when it suffers a lot of CPU consumption, for example in…
redxlus
  • 3
  • 1
0
votes
0 answers

Unable to boot from virtual cdrom/iso in supermicro server

i have a supermicro server 6048r-e1cr36n. I have tried to mount the virtual cdrom/iso however everytime its going to network boot. I tried to do F11 and select the ATEN Virtual cdrom but it goes network boot. This happens if i reorder the boot order…
xrkr
  • 363
  • 1
  • 5
  • 10
0
votes
1 answer

Supermicro X10DRL-i 4 Beeps while Running GPU Stress Test

As a bit of a testbench before deployment, I'm running a Supermicro X10DRL-i w/ dual Xeon E5-2620v4's and 64GB RAM. I have a Sapphire AMD Vega56 in the 16x slot. I was running some stress tests today to check for system stability and I ran into an…
Felix Jen
  • 403
  • 4
  • 17
0
votes
1 answer

LUKS hangs on CentOS running on Atom C3758 CPU

Whenever I try to setup LUKS on my CentOS install on a Supermicro A2SDi-8C-HLN4F motherboard (Intel ATOM CPU C3758), everything seems to work fine until the process completely freezes when creating the filesystem (ext4) or trying to mount the…
MWinther
  • 1
  • 1
0
votes
0 answers

mixing RAM sizes in SuperMicro X10DRH-iT

I have maxed out my server with 16 x 32 GB DIMMs: 32GB PC4-17000 DDR4-2133Mhz 4Rx4 1.2v ECC I would like to replace 8 of those with larger (64 GB) DIMMS with the exact same specs, except 64 GB instead of 32 GB. The party line is "don't mix sizes"…
user2434421
  • 71
  • 1
  • 4
-1
votes
1 answer

converting from raid 10 to raid 1 on windows server 2012 r2

My current setup is that my OS and other important installed files are all installed in my raid 10 array, however, I need the 2 drives (ssd) in the array for something else, is there a way to convert my existing raid 10 to raid 1? or do I need to…
FocalPoint
  • 1
  • 1
-1
votes
1 answer

Server still Beeping even after adding New HDD

Here is the case A week ago SuperMicro Server started beeping due to one HDD failure which is part of Raid, This server has Physical Raid Controller .. Now i replaced the faulty HDD with New HDD and now new HDD is blinking with both Blue LED and Red…
OmiPenguin
  • 137
  • 1
  • 2
  • 11
1 2 3
…
18
19