Point-To-Point Tunnelling Protocol is an insecure, obsolete networking protocol which exposes a layer 2 tunnel. It uses a TCP connection for control communications and a GRE tunnel for the actual data. It was historically used to create VPNs.
Questions tagged [pptp]
340 questions
1
vote
0 answers
What IPTables settings are needed to allow multiple clients to tunnel through a VPN
I'm trying to lock down my VPS but still allow PPTP-VPN access and am running into a snag. Hoping someone may be able to offer input. Basically trying to figure out what part of my iptables is preventing multiple clients from tunneling out into…
![](../../users/profiles/119599.webp)
filmoreha
- 221
- 1
- 3
- 7
1
vote
1 answer
Can the ASA 5505 use pptp as the VPN type? If so does anyone have a link to a config example?
I'm migrating from a PIX to a ASA and the PIX has the remote users PPTP to it. This is not pass though but the VPN type of the PIX. Does the ASA even support this? I have been trying to search around but all I have found is for allowing PPTP pass…
![](../../users/profiles/32265.webp)
evolvd
- 1,374
- 6
- 33
- 58
1
vote
0 answers
Connection fails to a PPTP server
I am having some problems connecting to my PPTP server. Sometimes I connect just fine but if I try in a few minutes, the connection may fail. I am connecting to Ubuntu 10.04 from Ubuntu 11.04 with no firewall from both sides. Here is my PPTP server…
![](../../users/profiles/78650.webp)
Andrew
- 1,044
- 6
- 21
- 36
1
vote
2 answers
Configure IPTables to block specific ports on VPN Disconnect?
I am using the latest Ubuntu distribution... and I have a rather spotty VPN connection. I am using the default Network Manager application that came with Ubuntu.
I am having trouble maintaining a connection to my VPN, and that being a separate…
![](../../users/profiles/118510.webp)
Crowe T. Robot
- 113
- 4
1
vote
1 answer
Replacing modem with a vpn router
Can I replace an open network iconnect 624 modem with a cisco router in a small network that needs multiple PPTP VPN connection? iconnect 624 modem doesnt allow multple simultaneous PPTP VPN channels? So if i replace this modem with a cisco 881…
![](../../users/profiles/99534.webp)
ryju
- 47
- 3
1
vote
2 answers
pptp on linux - I do not want to save passwords to chaps_secrets
I do not like my password to be stored in plain text on linux server. Is there a way to use pptp without storing password to /etc/ppp ?
![](../../users/profiles/12027.webp)
danatel
- 437
- 2
- 4
- 7
1
vote
0 answers
What steps can I follow to diagnose why PPTP VPN (rasClient) has suddenly stopped connecting?
I use my a Windows Server 2008 R2 workstation as a VPN client to a Windows 2003 RRAS VPN host. It has worked flawlessly for many months.
All of sudden, rasClient stops connecting and throws:
Error 651: The modem (or other connecting device) has…
![](../../users/profiles/110279.webp)
digitalmaps
- 131
- 6
1
vote
1 answer
PPTP VPN - users cannot access internet via the server (Failing before DNS)
I apologize to be opening another question with such a similar title, but
PPTP VPN - users cannot access internet via the server
does not quite cover the issue I'm encountering.
I have a VPN Server setup through Windows XP. I can successfully…
![](../../users/profiles/110862.webp)
Nick Heidke
- 125
- 1
- 7
1
vote
2 answers
Strange PPTP Issue
I have a Windows PPTP VPN Tunnell that I connect to. This terminates on a Win2k8 Server.
I authenciate fine to the VPN. I can RDP to my admin workstation fine and from this I can RDP to all of the clients I want to connect to.
When I try and RDP…
![](../../users/profiles/99233.webp)
Zapto
- 1,824
- 6
- 23
- 39
1
vote
0 answers
Is it possible to set up a pptp server in windows via console?
I want to be able to turn a machine into a pptp server from commandline so that it can be scripted, is this possible?
![](../../users/profiles/106177.webp)
Ryan
- 11
- 1
1
vote
2 answers
Losing DNS when connecting via pptp vpn from a Windows client to a Linux server
I setup pptp on my Linux (CentOS) server. When I connect from a Windows client
I am losing name service on the windows side. Connecting to my application works
ok, though.
I tried to set ms-dns in option-pptp and also to set a DNS server on the…
Michael Diehl
1
vote
1 answer
how to choose secure PPTP password?
I'm running a PPTP server on a ubuntu VPS, which has around 20 users . currently we use passwords like this "bi9_Knh78A#" . is this considered safe ? What's the best method to choose passwords ?
How secure is PPTP VPN when passwords are very strong…
![](../../users/profiles/92091.webp)
Matthew
- 13
- 2
1
vote
1 answer
Cisco 877 VPN: PPTP encryption not working
A followup to this question.
I have a Cisco 877 ADSL router configured (at last!) to act as a VPN server; it supports both PPTP and L2TP VPNs, and I can successfully connect to it from Windows computers using the built-in VPN software.
There is only…
![](../../users/profiles/6352.webp)
Massimo
- 68,714
- 56
- 196
- 319
1
vote
2 answers
PPTP traffic logging
I am running pptpd on a Centos 5 machine but I didnt set up any logging.
In case of an abuse, I need to determine which of my users did the bad things, meaning I need to log all the traffic. I may have up to 20 users which will use the VPN…
![](../../users/profiles/83517.webp)
jon
- 31
- 1
- 3
1
vote
1 answer
Can I assign a different DNS for 192.168.*.*?
I'm trying to connect to my company's network via PPTP VPN from Mac OS X.
I had a problem which turned out to be wrong netmask configuration which prevented 192.168.10.16 and 17 DNS servers from being accessible. The gateway IP is 192.168.7.117 and…
![](../../users/profiles/55752.webp)
Dan
- 317
- 1
- 3
- 13