Questions tagged [modem]
145 questions
0
votes
1 answer
WiFi Hotspot Security / Payments
I'm setting up a local coffee shop network-And we need to display a terms of service / authentication screen before they can connect to internet.
Internet --> PC/SERVER --> Wireless Router
Then install software on the PC bridge to run the prompt? If…
Scott A. McLeod
0
votes
5 answers
Increasing fax transmission speed in Windows Server 2003
I have a rather strange problem and it might not have a solution and this might not even be the forum for this, but here goes :-)
I have a requirement for sending faxes from Word 2007 to a bunch of fax numbers in a particular user's contact list.…
![](../../users/profiles/8945.webp)
ChamaraG
- 23
- 1
- 1
- 5
0
votes
1 answer
Local sharing between Netgear router and modem
We have 2 internet (Broadband) connection,
About connection 1
ADSL modem (Binatone) + Netgear wireless router (Netgear WGR614-v10)
ADSL Modem (192.168.1.0) , Wireless router (192.168.2.0)
About Connection 2
ADSL wireless modem router (Netgear…
![](../../users/profiles/32046.webp)
Kumar
- 823
- 3
- 20
- 43
0
votes
2 answers
Recommendation for ADSL modem/router that supports multiple servers w. static IPs?
I have what doesn't seem like all that complicated a network in my home: I have a block of 8 (= 5 usable) static IP addresses, which are assigned to five externally-visible servers; I also have a bunch of Macs and PCs and other connected devices…
![](../../users/profiles/77729.webp)
Jim Miller
- 713
- 2
- 11
- 23
0
votes
1 answer
Westell 7500 - unable to reach static IPs from external network
I am trying to troubleshoot a network configuration at a remote site. It's a standard configuration for us, that we use across multiple sites. The only difference here is that this ISP uses PPPoE, whereas our others do not.
We were assigned a block…
![](../../users/profiles/25320.webp)
Geo Ego
- 205
- 3
- 13
0
votes
1 answer
How to setup tp-link wi-fi adsl router to use internet signal from cable modem (there is no WAN port)
I have TP-LINK TD-8901G router and it has 4 LAN ports, but there is no separated WAN port. Also, I have one CISCO 2100 cable modem. So, how I can setup tp-link to use signal from cisco modem and to share Internet link through other LAN ports and…
![](../../users/profiles/46056.webp)
sasa
- 101
- 3
0
votes
1 answer
wvdial centos zoom modem redial issue
I have a zoom modem that dials out initially fine when I control-c out and try and redial it hangs, how do I tell wvdial to reset the modem before dialing I searched google but could not find the right solution.
![](../../users/profiles/65053.webp)
user65053
- 5
- 1
0
votes
1 answer
Hosting website on PC through firewall
I would like to host a website on my PC. It is connected to a firewall which in turn is connected to a DSL Modem.
Actually I am not getting the correct way to configure port forwarding.
Modem: Beetel 220BXI.
Firewall: Netgear FVS124G.
Can anyone…
![](../../users/profiles/94410.webp)
jagbandhuster
- 123
- 4
0
votes
1 answer
Netgear Router/Modem installation PPPoA NAT issues
I am having difficulty getting something that should be simple going. I have a Netgear DM111P modem connection to a broadband connection using PPPoA. Connected to this I have a Netgear FCG318 wireless router/8 port switch. This serves about a dozen…
![](../../users/profiles/10220.webp)
seanl
- 470
- 5
- 13
0
votes
5 answers
Which firewall i must use?
Our network is about 70 computers. We now use kerio winroute firewall on windows xp. I am not happy with it and on the other hand i am not a network expert, a software developer. There is noone understanding network except me. We need a firewall…
user59059
0
votes
1 answer
DOCSIS 3 Cable Modem Question
Does anyone have an idea of how many IP addresses max a DOCSIS 3 cable modem can support? I seem to get varying answers even from different people at our ISP.
Thanks,
Ryan
![](../../users/profiles/3066.webp)
rmwetmore
- 432
- 1
- 5
- 10
0
votes
1 answer
minicom US Robotics 33.6 Sportster Debian Linux
I am trying to get a US Robotics Sportster 33.6 modem external working in minicom. When I fire up minicom it will initialize the modem and the lights will fire up, but it will not let me send any commands to the modem within minicom. Any ideas as…
![](../../users/profiles/51112.webp)
muncherelli
- 719
- 1
- 4
- 22
0
votes
2 answers
Netgear Modem Power Supplies, do AMPS matter?
i recently purchased a Netgear DGND3300 modem from USA for Australia.
Unfortunately it didn't come with a power adapter so i bought one locally, however the modem is recommended to have 12Volts and 1.5Amps from its power adapter, but my local…
user54983
0
votes
1 answer
Serial modem output interference on linux command line
I am manually dialing remote machines using my serial modem via the linux command line. I am automating the process, hence not using any dialing tools (I've already tried most of them - none are sufficient).
I can make connections successfully -…
![](../../users/profiles/45104.webp)
tjbp
- 193
- 3
- 6
0
votes
2 answers
Setting up a Cisco router for dial in access
Our MPLS provider needs our routers to be setup with modems so that they can dial in and make config changes when necessary. I have connected the modem to the router (Cisco 2600) via the aux port. When I dial the # for the modem, it rings, but never…
![](../../users/profiles/12510.webp)
Citizen Chin
- 532
- 1
- 12
- 21