Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [mib]

Management Information Base, used in SNMP.

A repository for information used mostly for the SNMP protocol. Information can be found here.

59 questions
8
votes
3 answers

SNMP - What are .mib files used for, and why are there many of them for a single printer?

I am investigating methods of monitoring particular stats with printers. I am not very knowledgeable yet, and was just curious what .mib files are used for and why there are many of them for a printer? Example:…
Joshua Enfield
  • 3,404
  • 8
  • 41
  • 58
6
votes
3 answers

how to get interface traffic snmp information for routers ( cisco, zte, huawei ...)?

I have cisco, zte, huawei routers..How can i get the traffic information of every interfaces of these routers. I donot have mib file of zte and huawei. So, i want a generic mib file which can monitor every interfaces of these routers
padam gurung
  • 63
  • 1
  • 1
  • 4
5
votes
2 answers

Which SNMP variables to diagnose/characterise wifi congestion?

I'm preparing for a load test of a classroom wifi system. The pupils all turn on their laptops at the start of the lesson, which launches the web browser and then they start the lesson - which involves downloading a flash based lesson (from a server…
Hamish Downer
  • 9,142
  • 6
  • 36
  • 49
5
votes
1 answer

SNMP MIB file resource

My company(ISP) has 50+ switch models in our network, we manage them via SNMP from our web based intranet, for some Huawei switches we can't figure out the OID's we need (we usualy figure the OID we need our self, beacause we usualy don't receive…
Radu Maris
  • 161
  • 1
  • 10
4
votes
2 answers

How do I select an OID for my MIB

I've been trying to attach an OID to run a specific script for sometime and at this point I think the culprit is my bad MIB. I've corrected my MIB but I'm curious about the OID i'm trying to use. Currently I am trying to use the .1.3.6.1.4.1.214…
Funkyguy
  • 161
  • 1
  • 6
3
votes
1 answer

Did not find 'zeroDotZero' in module SNMPv2-SMI

I have a perl script that searches through our switches to find which one hosts a given IP address; this script uses net-snmp libraries to poll through a daisy-chain of ethernet switches (think core / distribution / access) until it finds the…
Mike Pennington
  • 8,266
  • 9
  • 41
  • 86
3
votes
4 answers

Looking for toner level OID for nagios snmp for Brother 9460

I'm setting up an Opsview (nagios) server for monitoring. It's all going fairly swimmingly so far. The most immediate use for the system will be monitoring (or more to the point, alerting me about) printer toner levels. At the moment, the "alert"…
JoshP
  • 278
  • 3
  • 6
  • 25
2
votes
2 answers

How to Determine the Correct OID to Use for Monitoring

Is there a correct/better way of determining the correct OID to use for SNMP monitoring? I was able to download the MIB directly from the device, but I am lost on finding the correct OID from the list of hundreds of OIDs. All forums that I've come…
confoundr
  • 347
  • 3
  • 8
  • 18
2
votes
2 answers

snmpget error: “No Such Object available on this agent at this OID”

I want to create my own MIB. I'm struggling on this from couple of weeks. I followed this tutorial and using net-snmp 5.7.3. What I'm doing is: My setup: I have two VM's, both Ubuntu 16, one is snmp-server with IP:192.168.5.20 and the other…
Ashish Srivastava
  • 121
  • 1
  • 5
2
votes
2 answers

Why is the wrong MIB being used during snmpwalk?

Running snmp walk for the following OID 1.3.6.1.2.1.43.11.1.1.9, which belongs to PRINTER-MIB under prtMarkerSuppliesLevel, is returning SNMPv2-SMI values. I imagine they are correct, but why is the SNMPv2-SMI MIB being referenced here? I'm running…
Hammy
  • 21
  • 3
2
votes
0 answers

SNMP commands for IBM server

I’m trying to get some data from an IBM server, for example the temperature using the OID .1.3.6.1.4.1.2.3.51.3.1.1.2.1.1 If I run the command: snmpget -O n -v 2c -c public IP .1.3.6.1.4.1.2.3.51.3.1.1.2.1.1 I get the answer: no such object…
FabriC
  • 21
  • 1
  • 5
2
votes
1 answer

Why would you add MIBs to a device/agent?

I'm currently learning all the SNMP protocols and attempting to put together a script for querying device information, purely all GET queries. I've seen a lot of example questions/scripts where people have or can create their own MIBs in a…
codaamok
  • 186
  • 13
2
votes
0 answers

snmpget "No such object available on this agent at this OID"

I have been working on trying to get a value with a custom MIB through SNMP This is my custom MIB: MY-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, enterprises FROM SNMPv2-SMI ; psutest MODULE-IDENTITY …
Funkyguy
  • 161
  • 1
  • 6
2
votes
1 answer

SNMPTT and MIB files

I have a system setup using SNMPTT to translate incoming traps and put them in a MySQL database. From there, a custom made web application reads out the database and presents the trapt to the user. The problem is, only basic OID's like linkUp,…
Harold Holsappel
  • 33
  • 4
2
votes
0 answers

Q-BRIDGE-MIB representation of ports on Dell PowerConnect 6248

I have a Dell PowerEdge 6248 with a 2x10Gb uplink module. I'm trying to make sense of the representation of the ports from the following snmp output: Q-BRIDGE-MIB::dot1qVlanStaticUntaggedPorts.4081 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00…
Andrew
  • 616
  • 5
  • 11
1
2 3 4