Questions tagged [megaraid]
192 questions
0
votes
1 answer
megacli: Failed to alloc kernel SGL buffer for IOCTL
Today one of my servers started sending me alerts about non-optimal RAID state. These were triggered by a very simple script run by cron -- if it detects that not all of the disks report 'Optimal' state, it sends an alert.
Now, the issue is that the…
![](../../users/profiles/201188.webp)
Erathiel
- 711
- 3
- 10
- 21
0
votes
1 answer
LSI MegaRAID 84016e reboots server
Have problem with my LSI 84016e. Have mobo Supermicro x8sil-f. Have installed RAID adapter, have booted to Debian 7, have created RAID10 and started just simple dd write test. Several beeps and server goes to reboot. In dmesg/messages logs Buffer IO…
![](../../users/profiles/134880.webp)
user134880
- 41
- 4
0
votes
1 answer
Merge two sas card into one
I have one existing raid card (9240-8i)with 8 sas hdd, but i want to add 8 more hdd with another raid card (same model), but i wan to merge with existing raid and add it as expansion, can it be done?
![](../../users/profiles/211799.webp)
Min Hong Tan
- 147
- 2
- 11
0
votes
1 answer
Is it possible to use megacli to copy from one partition to another?
Except "dd" and "rsync", is it possible to directly use the megacli command to copy one partition to another? I am using h310 raid controller, and it seems not working well using "dd" or "rsync", which sometimes results in firemware failure, reset…
![](../../users/profiles/227967.webp)
user180574
- 225
- 1
- 3
- 11
0
votes
2 answers
LSI MegaRaid live conversion from RAID 6 to RAID 0+1
I've currently got a lovely working server that has an LSI 9265-8i RAID card in it with 4x1TB RE4 drives, also running CacheCade Pro 2.0 with 2x180GB SSDs in RAID1. I currently have the main array running on RAID6, as much as I like it. I think…
![](../../users/profiles/202070.webp)
Chrisjc
- 27
- 1
- 3
0
votes
1 answer
LSI Megaraid 150-6 as regular SATA controller
I have an old but reliable server board that does not have any SATA ports on it.
Also i have LSI Megararaid 150-6 (with latest firmware) which i want to use as ordinary "dumb" SATA controller.
I don't want to use any RAID functionality of the…
![](../../users/profiles/204080.webp)
b00ster
- 1
- 3
0
votes
1 answer
Enabling Temperature Support on LSI MegaRaid Cards
I've got two IBM ServeRAID M5014 SAS/SATA Controller cards in two different machines. One reports drive temperatures, the other does not. I am hopping that it is some type of megacli option that I can set. However, I have looked throughout the…
![](../../users/profiles/179153.webp)
Squid
- 19
- 1
- 4
0
votes
1 answer
RAID: replacing a disk before it fails
We have a RAID 5 setup (Megaraid SAS ROMB) with 4 930 Gb physical disks running as a 2.7 TB VD. Recently (a few months back) we had a drive fail and had to leave it in degraded mode for ages (various factors, wish we didn't but it's not in the scope…
![](../../users/profiles/153274.webp)
Chris O'Kelly
- 296
- 6
- 19
0
votes
1 answer
How to find out the amount of sectors available in a RAID physical disk for replacement?
So, to start with, let me confess I have no knowledge of RAID besides what I read in a few APC mags 5 years back and what the acronym stands for. Everything I know now comes from assumptions and the past day's research. We have a LSI MegaRaid array…
![](../../users/profiles/153274.webp)
Chris O'Kelly
- 296
- 6
- 19
0
votes
1 answer
Megaraid Firmware fault
After building a new server (IBM X3550). Getting error
Firmware is in Fault state: MFI register state 0xF0FF2102. -- For this one could not get any help in google.
And on the BIOS system setting getting the message:
Driver Health Protocol: Missing…
![](../../users/profiles/137925.webp)
chandank
- 847
- 3
- 14
- 31
0
votes
1 answer
Megacli check returns "OK;NRPE: Unable to read output"
There is an icinga server set up to run check_megaraid_sas. It has been working beautifully for the last ~7 months.
During this time several "Unable to read output" messages have shown up for a variety of reasons, and in all of those cases the…
![](../../users/profiles/98834.webp)
isaaclw
- 123
- 7
0
votes
3 answers
MegaRAID Storage Manager Error 1920 "Service MRMonitor (MegaMonitorSrv) failed to start." on Windows Server 2003 R2 x64
I'm trying to install the MegaRAID Storage Manager 8.10 provided by SUPERMICRO, but I keep getting an error 1920 that "Service MRMonitor (MegaMonitorSrv) failed to start. Verify that you have sufficient privileges to start system services."
I'm…
![](../../users/profiles/50348.webp)
Gup3rSuR4c
- 661
- 2
- 13
- 29
0
votes
2 answers
setup raid 6 with 12 - 2 TB drives
I have two 500GTB 7.2k Sata 2.5in drives, plus twelve 2TB drives, and LSI 9260-8i SAS/SATA Card. I need to have OS on one label the rest for storage. I am unsure how to build the raid6. It has the LSI MegaRaid utility. Should I build it all as one…
![](../../users/profiles/98493.webp)
ccc
- 1
- 1
- 1
0
votes
0 answers
Supermicro won't boot from raid virtual drive after a power outage
One of our supermicro servers won't boot from the virtual drive on a MegaRAID SAS 9361-8i after a power outage.
It can still boot from a USB stick without trouble, all hard drives and
file systems seem to be intact. The correct drive is not shown as…
0
votes
1 answer
ESXi does not show drives for second RAID controller with NVMe drives
I got a second RAID controller (AVAGO 9440-8i) to put in my Dell T440 server (first RAID controller is a H740P). I got the Broadcom U.2 enabler cable and two WD Gold 2TB drives.
I've updated ESXi, the lsi_mr3 package, the whole original Dell-system…
![](../../users/profiles/916816.webp)
boindil
- 1
- 1