Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [hp-procurve]

ProCurve was the trade name of network products developed by Hewlett-Packard from 1998 to 2010. Since 2010 the brand name changed to HP Networking Products but users still recognize them as ProCurve.

145 questions
5
votes
1 answer

Procurve Primary VLAN

I'm trying to depreciate usage of VLAN 1 on my ProCurve switches; 1 is unused. I understand that VLAN 1 must exist, but I want to remove it from all ports, especially trunks between switches. The problem I have is that stacking does not seem to work…
fukawi2
  • 5,327
  • 3
  • 30
  • 51
5
votes
1 answer

ProCurve network expansion

I've hit a bit of a wall with our network scale-out. As it stands right now: We have five ProCurve 2910al switches connected as above, but with 10GbE connections (two CX4, two fiber). This fully populates the central switch above, there will be no…
Blue Warrior NFB
  • 611
  • 6
  • 17
5
votes
2 answers

Multiple vlan issue with procurve switch

I have a cisco asa5505 as my rtr/fw(10.1.3.254). I have vlan 1 and vlan 3. Vlan 1 is my default all access vlan. Vlan 3 is my Guest(dmz) vlan. I can't seem to get a dhcp ip address when my laptop is plugged into port 42 on my procurve. I have…
Chris-AZ
  • 107
  • 1
  • 5
5
votes
1 answer

Setting up Multicast NLB Cluster with HP 6120XG Switch

How can I setup an NLB cluster across 2 blades connected via a HP 6120XG Switch? All of the guides are for Cisco and setup static ARP entries on the switch but that is not possible on the HP Switch. Any help would be apreciated Thanks Dan
Dan
  • 91
  • 1
  • 3
5
votes
1 answer

HP Procurve 5406ZL - How to enable port-mirroring?

How would you enable port mirroring for a HP Procurve 5406ZL? The configuration guide is not very clear in the mirror-port function. I know that I'll need to use the mirror-port [[ethernet] PORT-NUM] but it don't know (or how) should I go…
fooyoong
  • 53
  • 1
  • 1
  • 3
5
votes
1 answer

HP Procurve MAC cache timeouts on long TCP sessions

We have a network of HP 2510G switches connected back to HP2912al for aggregation. We've noticed that long running connections like a MySQL DB dump start flooding out to all network ports once the mac-cache-timeout expires. Doing an "arping"…
mfarver
  • 2,576
  • 13
  • 16
5
votes
1 answer

Procurve 2810 command line - reassigning ports to a different VLAN

A very basic question, but my googling has failed to find an answer... At present the VLAN config looks like this: vlan 1 name "DEFAULT_VLAN" untagged 1 ip address 10.200.1.134 255.255.255.0 tagged 2,Trk1 no untagged 3-20,23-24 …
ChrisNZ
  • 606
  • 2
  • 9
  • 24
4
votes
4 answers

HP ProCurve 5412zl warm-boots on power failure while attached to UPS

My client's HP ProCurve 5412zl chassis switch reboots on occasion, despite being powered through four redundant power supplies and being under UPS protection. These reboots usually happen during a real power outage or during a brown-out or…
ewwhite
  • 194,921
  • 91
  • 434
  • 799
4
votes
1 answer

pfsense port-security limit mac to 1 (any mac allowed)

I am trying to set up HP procurve routers (25xx and 26xx) with port-security. Goal is to allow client devices and routers. But to disallow a switch, AP or a router in bridge mode. This should be accomplished by: Limit MAC to 1 per switch port at…
Tillebeck
  • 511
  • 1
  • 4
  • 19
4
votes
1 answer

Procurve script/automation

This may be a stupid question, but I'm normally not a network admin, but circumstances have me there. I'm trying to disable down ports on a switch, but have a boatload of them, I'd like to configure them as disabled, and with the guest vlan(in case…
Steve Butler
  • 1,016
  • 9
  • 19
4
votes
5 answers

How do I remove (un-apply) a named filter from a Procurve switch port using the CLI?

EDIT: Edited my examples to reflect that I was indeed attempting this with the switch in "configure" mode. Still no joy. EDIT: I've done some more searching on this issue. I just can't seem to see it clearly in the HP docs, and when I search…
Craig Tullis
  • 488
  • 3
  • 14
4
votes
1 answer

HP Procurve 2512/2524 protected port, source port filter or similar?

HP Procurve switches usually have a setting so that the ports are told which other ports they can communicate with. An easy setup using this is to only allow communication with the uplink, so that no clients on LAN can see each other or communicate…
Tillebeck
  • 511
  • 1
  • 4
  • 19
4
votes
2 answers

iSCSI SAN Implementation with several ESXi hosts and two Equallogic SANs

I work for a small state college. We currently have 4 ESXi hosts (all made by Dell), 2 EqualLogic SANs (PS4000 and PS4100) and a bunch of old HP Procurve switches. The current setup is very far from being redundant and fast so we want to improve it.…
Sergey
  • 41
  • 1
  • 2
4
votes
3 answers

will heavy network traffic affect other connections on HP ProCurve V1810-48G?

I have a HP ProCurve V1810-48G switch with a few servers running Citrix XenServer connected to it (everything in one rack). The switch is almost in its default configuration (no VLAN, no port mirroring/monitoring, no other routers connected other…
nn4l
  • 1,336
  • 5
  • 22
  • 40
4
votes
2 answers

ProCurve 1800 switch issue

I recently deployed ProCurve 1800-24G switches in place of some older ProCurve 2424M switches in my network. However, I'm having a serious problem with the switch connected to the router. It seems, every night when our Windows 2008 R2 server (off…
user98651
  • 95
  • 1
  • 2
  • 11
1
2
3
…
9 10