Questions tagged [dante]
49 questions
8
votes
1 answer
Dante (SOCKS server) not working
I'm trying to set up a SOCKS proxy using dante for testing purposes. However, I can't even get it to work with a web browser, after looking at several tutorials on how to do that.
I've tried in both IE and Firefox, in both cases, using "Manual proxy…
![](../../users/profiles/2449.webp)
gregmac
- 1,459
- 3
- 18
- 27
5
votes
0 answers
Dante unable to bind to public ip address
I have a Dante server on a host with multiple public ip addresses but it is unable to bind to the ips of the host. The ips are pingable, I have another service listening on each of them (different port) which works so I know the ips work. On my test…
![](../../users/profiles/115721.webp)
Romeo Mihalcea
- 502
- 1
- 6
- 24
4
votes
0 answers
Ubuntu SOCKS proxy setup with two interfaces - how to pass DNS
I setup a SOCKSv5 server (Dante) on Ubuntu with two ethernet interfaces:
eth0 is connected to my WAN with a static routable IP
eth1 is connected to my LAN with a private IP
I have a client connected on the LAN, and I'm able to ping the LAN port…
![](../../users/profiles/69302.webp)
Ravi
- 163
- 1
- 5
3
votes
0 answers
Dante Socks Multiple instances
I have correctly installed Dante on Ubuntu server as a proxy, and it works, but I must have e multiple instances of it (each of them has to works in different port).
I have tried it in this way:
tomas@server: $ sudo cp /etc/sockd.conf…
![](../../users/profiles/484434.webp)
CuriousPanda
- 33
- 3
3
votes
4 answers
dante not starting during server reboot
I installed dante (v1.4.2) using apt-get install dante-server on ubuntu 18.04 and have following configuration:
/etc/danted.conf
logoutput: /var/log/sockd.log
internal: eno1 port = 1080
external: eno1
external.rotation: same-same
socksmethod:…
![](../../users/profiles/475659.webp)
Deepika
- 57
- 1
- 3
3
votes
2 answers
Dante sockd can't forward traffic through multiple virtual IPs
I have configured Dante sockd to forward traffic through multiple IP interfaces. The config is basically this:
logoutput: /var/log/sockd.log
debug: 1
socksmethod: username none
internal: eth0 port = 60000
external: eth0
internal: eth0:0 port =…
![](../../users/profiles/267831.webp)
Simon Greenwood
- 1,343
- 9
- 12
3
votes
1 answer
Danted Socks Proxy with Authentication
I've been trying to set up a SOCKS proxy on linux with danted. I have the proxy working perfectly without authentication, but when I try adding in authentication with both method: username and method: pam I can't log in with any of the usernames or…
![](../../users/profiles/232139.webp)
Ed R
- 61
- 1
- 5
3
votes
1 answer
Use authentication with Dante Socks
I just set up my dante socks proxy and it works just fine without authentication. Now I want only certain users to be able to use it tho. Preferably only those users that are in the passwd. What would you guys recommend me using? Can I somehow use…
![](../../users/profiles/109245.webp)
cherrun
- 729
- 2
- 10
- 17
3
votes
0 answers
How do i configure a simple dante instance?
I'm trying to set up a simple SOCKS proxy on Amazon EC2, but I'm not able to figure out the documentation and configuration file for dante. For now i've been able to set up a proxy without authentication (which i took offline immediately after…
![](../../users/profiles/63608.webp)
Maciej Swic
- 270
- 5
- 18
2
votes
1 answer
SOCKS Proxy over DNS
I'm trying to implement something similar to the service provided by https://www.smartdnsproxy.com, where clients only need to change their DNS settings to connect to a HTTP/S or SOCKS5 proxy. I think I understand the individual components, but I'm…
![](../../users/profiles/199417.webp)
Oscar Wahltinez
- 85
- 6
2
votes
2 answers
Dante 1.4.x sockd not working for localhost
I am trying to run a SOCKS server which listens for SOCKS connections on localhost. There will actually be SSH tunnels reaching this server if you are wondering about the purpose. I based the configuration off the suggestions in the documentation…
![](../../users/profiles/124361.webp)
John Tate
- 179
- 4
- 19
2
votes
0 answers
Dante with Kerberos configuration across sites
I have a requirement to host a socks proxy in a central location, using Dante. What I've been asked to do is connect remote clients to it across the internet, they'll pass through a gateway routing device that will forward HTTP traffic to Dante, in…
![](../../users/profiles/315545.webp)
Stephen K.
- 21
- 2
2
votes
2 answers
Dante blocking some localhost connections
I connect through a tunnel to Dante. It works but still blocks two of the apps that I need to work through the SOCKS proxy
Aug 28 14:20:24 (1377699624) danted[3519]: block(1): tcp/connect [: 127.0.0.1.51519 -> 127.0.0.1.30000
Aug 28 14:20:33…
![](../../users/profiles/173705.webp)
Chroma Funk
- 33
- 1
- 5
2
votes
1 answer
Routing specific server traffic through my VPS
I've got a "multihome" setup: 2 internet connections, which boosts my speed significantly.
I've set up a proxy on my VPS for regular browsing, but some applications don't support this, and they don't like 2 IPs accessing their server with the same…
![](../../users/profiles/31413.webp)
Jelle De Loecker
- 1,055
- 6
- 16
- 29
1
vote
1 answer
Dante socks server on VPS doesn't work
My config on server side (/etc/danted.conf):
logoutput: stderr
internal: eth0 port = 1080
external: eth0
clientmethod: none
socksmethod: username none
client pass {
from: 0.0.0.0/0 to: 0.0.0.0/0
log: connect error
}
socks pass {
…
![](../../users/profiles/311748.webp)
user40602
- 111
- 2