Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [autoloader]

14 questions
68
votes
8 answers

Can't find .so in the same directory as the executable?

I have an executable which needs to link with libtest.so dynamically,so I put them in the same directory,then : cd path_to_dir ./binary But got this: error while loading shared libraries: libtest.so: cannot open shared object file: No such file or…
linuxer
  • 683
  • 1
  • 6
  • 4
2
votes
1 answer

bareos Using both tape drives (not multiplexing)

I'm using a Neoseries T24 (Flexstor II) autoloader with two drives. I have tapes (11 of them) in a pool labeled 'Full'. When I run two jobs, both for the 'Full' pool, they will wait in sequence so they can both use the same drive (0) instead of one…
BurningKrome
  • 525
  • 2
  • 8
  • 21
2
votes
1 answer

HP 1/8 G2 LTO-6 Autoloader upgrade to LTO7

We are looking at getting an HP 1/8 G2 LTO-7 Autoloader. We already have the LTO-6 version, which would become redundant with the introduction of the new one, so rather than waste it, is it possible to upgrade it? The actual autoloader part looks…
ryansin
  • 161
  • 1
  • 7
2
votes
3 answers

Encrypt backups with GPG to multiple tapes

Currently, I use tar to write my backups (ntbackup files) to a tape drive fed by an autoloader. Ex: tar -F /root/advancetape -cvf /dev/st0 *.bkf (/root/advancetape just has the logic to advance to the next tape if there is one available or notify…
Dan
  • 1,278
  • 18
  • 27
1
vote
1 answer

Bareos Autochanger not pulling tape

I've taken over a configuration of Bareos on Debian GNU/Linux 8 (jessie). Its a fresh install, using both file and Autochanger storage. Everything looks correct and bconsole will talk with the changer (I can move, mount, unmout, label tapes etc.).…
BurningKrome
  • 525
  • 2
  • 8
  • 21
1
vote
2 answers

Physical storage devices, such as tape and changer devices, not visible when booting Debian 8 Jessie, with hpsa driver.

Question Not detecting all physical devices behind Smart Array controller after upgrading to Debian 8 Jessie HP P212 Smart Array Controller and HP 1/8 G2 LTO-5 3000 SAS Autoloader Debian 7 Whezzy kernel 3.2.0-4-amd64: # lsscsi -g [0:0:0:0] disk …
Pablo Kromn
  • 13
  • 2
1
vote
0 answers

HP P212 RAID + Tape Library = Kernel Panic

I have a HP DL320e g8 v2 server running CentOS 7.1 (kernel 3.10.0-229.4.2.el7.x86_64). The onboard B120i SmartArray was disabled, and a PCI-Express P212 SAS HBA was installed with two identical 3TB Seagate disks in RAID-0 on the internal SAS port.…
Elieser Topassi
  • 103
  • 1
  • 1
  • 10
1
vote
1 answer

HP Autoloader mount, ESXi 4.1 through SAS - will it work?

I need to figure out if I can get this to work. I have a HP P2000 Storage system, connected to 2 x HP DL360 G7 through SAS. Then I got an HP Autoloader with connected through SAS too. Will I, in ESXi 4.1, be able to mount both the tapedrive and…
deanihansen
  • 227
  • 2
  • 4
1
vote
4 answers

Linux machine can't find its tape drive

I have an older HP NetServer LPr with what is apparently a Symbios SCSI card connecting to a Quantum SuperLoader 3 that is DLT based. From time to time, we seem to lose the connection to the autoloader. It's usually due to flaky power, but not…
Kyle
  • 1,849
  • 2
  • 17
  • 23
1
vote
4 answers

Why are extended warranties for tape auto loaders so high (nearly 50% the cost of the drive)?

I have quotes for an autoloader + extended warranty and I am baffled by the high cost of the warranty uplift. HP LTO-2 Bundle $3000, 3yr extended service agreement $1280 Quantum LTO-3 $2912, 3yr extended server $1408 Why is the warranty cost high?…
vfilby
  • 177
  • 2
  • 3
  • 9
0
votes
3 answers

Reconnecting SAS equipment

I need to reconfigure the cabling between some LTO tape drives and a server. Are they plug and play or do I need to do any configuration? From what I've read so far, it seems that recycling the power on the server and the drives should be enough. We…
Rich M
  • 273
  • 2
  • 15
0
votes
6 answers

BackupExec failing after 3-5 Minutes with error code E00084F4

Environment Server: HP ProLiant DL320s G1 (System ROM: W04) O/S: Windows 2003 R2 x64 SP2 Autoloader: HP 1x8 G2 AUTOLDR (Firmware: 2.50 / 2.00n) Drive: Ultrium 3-SCSI (Firmware: D22W) SCSI HBA: HP SC11Xe (Firmware: 01033900) BackupExec: 12 SP3…
Richard Slater
  • 3,228
  • 2
  • 28
  • 42
0
votes
2 answers

Dell 2970 - HP 1/8 G2 autoloader keeps falling off LSI 2032 SCSI chain

I've a somewhat irritating problem with a Dell 2970 that has a HP 1/8 G2 autoloader (the Ultrium LTO 2 model) attached to the Dell/LSI 2032 non-RAID SCSI card. In essence, sometimes the autoloader/drive completely fails to appear on the SCSI chain…
John Parker
  • 133
  • 9
0
votes
2 answers

RHEL5 do not see sas tape library

We have a tape library which is connected to a server by SAS link. Server is running OS Linux. OS doesn't see the tape library in /proc/scsi/scsi . We tried to rescan scsi bus(*1), but it didn't help. What could we do to access it? PS:The main goal…
st0ne_c0ld
  • 23
  • 1
  • 3