Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [apc]

APC by Schneider Electric, formerly American Power Conversion, is a maker of electrical hardware, focused on, and best known for their uninterruptible power supply (UPS) product lines.

50 questions
0
votes
0 answers

E: Unable to locate package php5-apcu

trying to install APCu on Ubuntu: apt-get install php5-apcu Getting an error: E: Unable to locate package php5-apcu Following someone's suggestion I added: deb http://packages.dotdeb.org wheezy-php55 all deb-src http://packages.dotdeb.org…
VladaP
  • 1
  • 2
0
votes
0 answers

What caused apache to crash?

I have a high load server using php/apache/APC working fine for months. In the last 2 days it has crashed midday. if I restart apache it works so the problem is probably in the apache/php/apc stack. It runs at up to 200 hits/sec running highly…
Niro
  • 1,371
  • 3
  • 17
  • 35
0
votes
0 answers

Nut says APC UPS is on battery. It is not

Since 2 days my Smart-UPS 1500 RM reports it is on battery but this is clearly not the case since it's been running for more than two days indicating 100% battery with 01:30:00 running time. Batteries were replaced a couple of months ago. I do not…
divB
  • 538
  • 1
  • 6
  • 22
0
votes
1 answer

APC Extension unable to load dynamic library /usr/lib/php5/20090626/apcu.so

I have installed using this Tutorial https://www.23systems.net/2009/07/installing-alterative-php-cache-apc-with-plesk-on-ubuntu/ and all is running fine. Even APC is caching everything and apc.php shows me all possible results. But I am getting an…
karadayi
  • 127
  • 1
  • 8
0
votes
0 answers

*** glibc detected *** /usr/sbin/httpd: free(): invalid pointer: 0x068977f0 ***

Completely fresh install of CentOS and I've installed PHP, MySQL and Apache with all modules, when I first tried to run the service the following message is in the error_log followed by a memory map. *** glibc detected *** /usr/sbin/httpd: free():…
user3323520
  • 1
0
votes
0 answers

apache refuses to start when apc.shm_size is greater than 76M

I'm just setting up a new faster server for our Drupal site and was setting up APC and tried to set the apc.shm_size up to 128M however after restarting apache and reloading the APC Admin page Apache Simply goes away and returns no requests so I…
CHP
  • 1
  • 1
0
votes
1 answer

APC not working after centos and php upgrade

I had centos 6.5 on my server. I upgraded to centos 7. With this upgrade I have php 5.4 instead of php 5.3. All works fine except APC and xhprof extension. Here is the error I am having when I try to restart apache or any ather action conserning…
user3932702
  • 13
  • 1
0
votes
0 answers

Is it possible to disassemble an APC Netshelter SX enclosure?

I need to move an APC Netshelter SX 48U from one room to another, but the new room is lower than the current one and I cannot install it without disassembling it. According to APC, these enclosures are not made to be disassembled, but I was…
Baptiste Wicht
  • 111
  • 9
0
votes
0 answers

APC Power Controllers Inaccessible After Brief Power Loss

It seems like every time there is a brief power outage in our environment (1-2 second blip). There are generally a handful of APC power controllers that become inaccessible through network. The workaround is to unplug the device, wait a few seconds…
cheesesticksricepuck
  • 467
  • 1
  • 5
  • 17
0
votes
2 answers

It is possible to visualize the load of an APC switched PDU for a specified period of time?

There are some APC PDUs AP7953 and now we think about a solution for check the load over a period. We don't need a 100% correct Value only a trend on which hours we have more load to localize peeks in the Powernetwork. If I log into the PDU I can…
kockiren
  • 886
  • 2
  • 14
  • 35
0
votes
1 answer

Is there some software available to centrally manage APC IP enabled PDUs?

I am not looking for a recommendation of which one to use, just an answer as the whether anything to do this exists. We have a few dozen AP7921 & similar units that until now we have managed on an idivudual basis. Already collect power usage info…
TafT
  • 223
  • 2
  • 12
0
votes
1 answer

Getting APCUPSD working with PowerChute (pcnet)

After configuring apcupsd and starting the service the service eventually times out and reports Warning communications lost with UPS. The ups is configured with the IP of the client and the client is configured with the correct passphrase (working…
Ablue
  • 1,140
  • 1
  • 12
  • 32
0
votes
1 answer

replace APC smart signaling cable with RJ-45 to RJ-45

Is it possible to replace the APC Smart Signaling Cable PN: 940-1525A with an RJ-45 to RJ-45 cable? The cable is built as an RJ-50 to DB9, but I need to connect it to a console server that only uses RJ-45. I have pin-out diagrams that show the cable…
mcv110
  • 1
  • 1
0
votes
0 answers

Connecting an APC RackPDU directly to a Lantronix terminal server

I have an APC Rack PDU (AP7920) and a Lantronix ETS16P RS232 terminal server. I would like to connect the RackPDU directly to the Lantronix. The RackPDU has a serial RJ12 connector and the Lantronix a serial RJ45 connector. I found pinouts for…
divB
  • 538
  • 1
  • 6
  • 22
0
votes
1 answer

PowerChute appliance 4.4.1 for ESXi issues 302 redirect to localhost after login

I've been using PowerChute 4.3 network appliance on my ESXi host for a while now. I followed the instructions to download and install the appliance update to 4.4.1 this morning using the official tar.gz file. The update appeared to go well. Now when…
Steve Hiner
  • 143
  • 2
  • 9
1 2
3
4