I just switched from a fedora 25 machine to a fedora 26, and for some reason, I cannot mount the same drives as read/write. This "d_drive" is a physical SSD connected via SATA. I'm able to mount USB connected SSD drives as read/write, but for some reason, this SATA connected drive is only mounting as read-only. There's fstab entries are almost identical b/t the 2 installations
/dev/disk/by-uuid/fc7ba0e3-9426-4695-a723-c2d960bf3b21 /mnt/d_drive auto rw,nosuid,nodev,nofail,x-gvfs-show 0 0
after mounting, I see this from dmesg:
[62156.594073] ata3.00: exception Emask 0x10 SAct 0x1 SErr 0x480001 action 0x6 frozen
[62156.594080] ata3.00: irq_stat 0x08000000, interface fatal error
[62156.594085] ata3: SError: { RecovData 10B8B Handshk }
[62156.594091] ata3.00: failed command: WRITE FPDMA QUEUED
[62156.594100] ata3.00: cmd 61/08:00:00:08:00/00:00:00:00:00/40 tag 0 ncq dma 4096 out
res 40/00:00:00:08:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[62156.594105] ata3.00: status: { DRDY }
[62156.594112] ata3: hard resetting link
[62157.053978] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[62157.054211] ata3.00: supports DRM functions and may not be fully accessible
[62157.054583] ata3.00: NCQ Send/Recv Log not supported
[62157.054902] ata3.00: supports DRM functions and may not be fully accessible
[62157.055300] ata3.00: NCQ Send/Recv Log not supported
[62157.055311] ata3.00: configured for UDMA/33
[62157.055325] ata3: EH complete
[62194.475214] EXT4-fs (sdb1): warning: mounting fs with errors, running e2fsck is recommended
[62194.479586] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
When I try running the following, it seems to find a lot of issues (not sure how to post here), but given that it continues to find them and i'm using the "-p" "Automatic repair..", it doesn't seem like any are getting fixed
e2fsck -pc /dev/sdb1 > e2fsck.txt
I'm guessing this is some sort of simple oversight, but I've gone around in circles trying to figure this out and definitely need some help!