Freeradius radclient unsupported attribute

Question

I want to send disconnect-message to NAS using radclient program but when I want to disconnect one user using this command

echo user-name=zaib | radclient -x   192.168.3.1 disconnect "muh"

the debug mod show this error

rad_recv: Disconnect-NAK packet from host 192.168.3.1 port 3799, id=78, length=50
    Error-Cause = Unsupported-Attribute
    Event-Timestamp = "Jul  3 2017 09:35:01 +03"
    Message-Authenticator = 0xd52977c552ae0a7c83bb32c2acc6d195

I using fortigate as NAS I searched alot about this problem but I did not find solution

score 0 · Answer 1 · answered Jul 03 '17 at 06:54

0

Check if attribute you are using is on that list: FreeRADIUS Attributes

answered Jul 03 '17 at 06:54

mrc02_kr

164
7

thank you for your replay which attribute you mean I want to disconnect one user using above command – Abobaker EngIt Jul 03 '17 at 06:56
update coa { User-Name = "%{User-Name}" Acct-Session-Id = "%{Acct-Session-Id}" NAS-IP-Address = "%{NAS-IP-Address}" } – Abobaker EngIt Jul 03 '17 at 07:06
please help me @mrc02_kr – Abobaker EngIt Jul 03 '17 at 07:35
According to [link](https://wiki.freeradius.org/protocol/Disconnect-Messages) try to write attributes to file and then try to disconnect user. Maybe attributes are case sensitive and you need to type "User-Name=zaib" instead of user-name=zaib. I don't know for sure because I always type it with uppercase :) – mrc02_kr Jul 03 '17 at 09:34
I writed the comman in upper case but the same result is appear – Abobaker EngIt Jul 03 '17 at 11:00
I don't know where is my wrong – Abobaker EngIt Jul 03 '17 at 11:29
Try this: [Pastebin.com](https://pastebin.com/UY35v5e8) – mrc02_kr Jul 03 '17 at 11:52
I am so sorry about my questions and thank you very much for your trying but unfortantly same error is appear – Abobaker EngIt Jul 03 '17 at 11:58

Freeradius radclient unsupported attribute

1 Answers1