After 20 pages of SO results about Mikrotik and some more google results, I'm come here, down on my knees to request some enlightment.
I have a network with static IP and some public IP (248 mask).
So far I've configured the network to use one of those public IP and use it for 2 subnets (192.168.85.X and 192.168.5.X) wich are isolated from each other and both can access internet.
What I'm trying to achieve is to add a second WAN ip to the same interface, and route traffic to a specific server to use that IP.
What i mean is:
Any PC from 192.168.X.X should use WAN IP1 and use internet with it. Any PC from 192.168.X.X trying to access INSERT RANDOM SITE/IP HERE should use WAN IP2 to browse and navigate to that website (while all the rest of the traffic goes through WAN IP1). The device that gives me the WAN link only has 1 "out" port, so there is no way to put 2 cables from the "modem" to the Mikrotik, right now there is 1 cable going from the modem to the Mikrotik device. I've seen some forum post where the first part can be solved by just connecting 2 cables and then assign different IP for each interface.
As you may notice, I'm really raw in networking and routing, so any GUI/Winbox instruction is appreciated, but CLI commands would be just fine.