I try to get the following information out of the switch stack for monitoring purposes. Here is the command and its output executed directly on the switch stack via ssh login:
root@stack> show virtual-chassis
Preprovisioned Virtual Chassis
Virtual Chassis ID: cf44.0df5.1234
Virtual Chassis Mode: Enabled
Mstr Mixed Neighbor List
Member ID Status Serial No Model prio Role Mode ID Interface
0 (FPC 0) Prsnt GAxxxxxxx8 ex3300-48t 129 Master* NA 2 vcp-255/1/2
3 vcp-255/1/3
1 vcp-255/1/1
1 (FPC 1) Prsnt GAxxxxxxx2 ex3300-48t 0 Linecard NA 0 vcp-255/1/2
5 vcp-255/1/3
2 vcp-255/1/1
2 (FPC 2) Prsnt GAxxxxxxx3 ex3300-48t 0 Linecard NA 1 vcp-255/1/2
3 vcp-255/1/3
0 vcp-255/1/1
3 (FPC 3) Prsnt GAxxxxxxx1 ex3300-48t 0 Linecard NA 4 vcp-255/1/2
2 vcp-255/1/3
0 vcp-255/1/1
4 (FPC 4) Prsnt GAxxxxxxx7 ex3300-48t 129 Backup NA 5 vcp-255/1/2
6 vcp-255/1/3
3 vcp-255/1/1
5 (FPC 5) Prsnt GAxxxxxxx5 ex3300-48t 0 Linecard NA 4 vcp-255/1/2
6 vcp-255/1/3
1 vcp-255/1/1
6 (FPC 6) Prsnt GAxxxxxxx3 ex3300-48t 0 Linecard NA 4 vcp-255/1/0
5 vcp-255/1/1
In the end I would like to check for the amount of members and/or for status (Prsnt/NotPrsnt), also if there was a role change (e.g. Backup --> Master).
With snmpwalk I got a huge list of entries, but nothing matches with any values above.
So does it mean there is no possibility to get this info out of the stack?