I'm trying to setup two ZyXEL GS1920-48HP swithes in different parts of a building. Each of them have the following VLANS:
1 (Default) 10 (WLAN) - for SonicWALL SonicPoints
I know ZyXEL doesn't have a trunking mode for ports, so I'm trying to configure the switches to wrk in the following configuration:
[Firewall] <-> [ZyXEL 1] <-> [ZyXEL 2]
[ZyXEL 1] VLAN 1: Default LAN VLAN 10: WLAN VLAN
Port 1: Connected to SonicWALL X0 (VLAN 1 - Untagged) Port 2: Connected to [ZyXEL 2] (VLAN 1 - untagged, VLAN 10 - tagged) Port 3 - 44: LAN connections (VLAN 1 - Untagged) Port 45 - 48: Connected t X5 on SonicWALL and SonicPoints (VLAN 10 - Untagged)
[ZyXEL 2] VLAN 1: Default LAN VLAN 10: WLAN VLAN Port 1: Connected to {ZyXEL 1] (VLAN 1 - untagged, VLAN 10 - tagged) Port 2 - 44: LAN Connections (VLAN 1 - Untagged) Port 45 - 48: Connected to SonicPoints (VAN 10 - untagged)
My problem: When connected to [ZyXEL 2], I can communicate on default VLAN, but cannot communicate over VLAN 10. It may work for a few seconds then stop. I think I'm overlooking something simple. Any help is appreciated.
