I have 2 Mikrotik RB2011 routers. I need for Device on 192.168.3.10 to be able to communicate with device 192.168.2.10 for UDP traffic on port 50000
With the below config I am not able to ping between routers
ie plugged into router 1 cant ping router 2 wan or lan and vice versa
when plugged into the unmanaged switch for the 10.0.0.0/8 i can ping both 10.0.0.2 and 10.0.0.3
Current setup:
Router 1 = Benton
WAN 10.0.0.2 Ether 1
Lan 192.168.2.1 Ether 2
Device 192.168.2.10 Plugged into Ether2
Firewall rules are blank
Nat rules Blank
Static Routes
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
0 A S 0.0.0.0/0 10.0.0.1 1
1 ADC 10.0.0.0/8 10.0.0.2 WAN Port 1 0
2 ADC 192.168.2.0/24 192.168.2.1 Local Bridge 0
3 A S 192.168.3.1/32 10.0.0.1 1
Router 2 = Paducah
Wan 10.0.0.3 ETHER1
Lan 192.168.3.1 Ether 2
Device 192.168.3.10 plugged into ether 2
Firewall Rules Blank
Nat Rules Blank
Static routes
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
0 A S 0.0.0.0/0 10.0.0.1 1
1 ADC 10.0.0.0/8 10.0.0.3 bridge1 0
2 A S 192.168.2.1/32 10.0.0.1 1
3 ADC 192.168.3.0/24 192.168.3.1 bridge1 0