0

I installed PFsense on VMware with two interfaces.

1.WAN -> 192.168.1.110 ->Bridge   
      Getaway->192.168.1.1=>Modem IP

2.LAN -> 10.1.1.1 ->LAN Segment

how config Nat and Route to access to Internet (from Host Connect to 10.1.1.1 interface )And Modem(or 192.168.1.0/24 rang IP) ?

user2254798
  • 101
  • 3
user356671
  • 1
  • 1
  • 1

1 Answers1

1

Firewall -> NAT -> Outbound

There you can create a new rule for the WAN with source 10.1.1.0/24 and NAT address 'WAN address'.

This should automatically be done by pfsense if you assigned a WAN and LAN interface.

Also: Interfaces -> WAN

Make sure if you use static addresses that you have an IPv4 upstream Gateway set. If not, click on 'add a new one' and enter your gateway there.

mzhaase
  • 3,778
  • 2
  • 19
  • 32