I'm following up on a similar user request: QNAP TS-419p as a VPN Gateway?
I have a QNAP TS-419 II, with Firmware 4.1.2. I have a VPN service provider than uses OpenVPN to connect to their VPN services. Within the files given I have a ca.crt, myUser.crt, myUser.key, and a bunch of opvn configuration files for proxied or fully routed vpn connections.
I have rather followed these instructions: http://support.purevpn.com/qnap-nas-qts-4-x-openvpn-setup-guide
When I click connect and failed after a few minutes. The following are the output within the log:
Sun Aug 9 00:40:02 2015 OpenVPN 2.2.1-8+deb7u3 arm-none-linux-gnueabi [SSL] [LZO2] [EPOLL] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Aug 4 2015
Sun Aug 9 00:40:02 2015 WARNING: file '/share/MD0_DATA/Download/vpn/pass1.txt' is group or others accessible
Sun Aug 9 00:40:02 2015 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
Sun Aug 9 00:40:02 2015 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Sun Aug 9 00:40:02 2015 WARNING: file '/share/MD0_DATA/Download/vpn/vpn.key' is group or others accessible
Sun Aug 9 00:40:02 2015 Control Channel Authentication: using '/share/MD0_DATA/Download/vpn/vpn.key' as a free-form passphrase file
Sun Aug 9 00:40:02 2015 Key file '/share/MD0_DATA/Download/vpn/vpn.key' used in --tls-auth contains insufficient key material [keys found=1 required=2] -- try generating a new key file with 'openvpn --genkey --secret [file]', or use the existing key file in bidirectional mode by specifying --tls-auth without a key direction parameter
For the Warnings, I understand it is a file permission issue, can someone tell me what it should be?
For the Note and OpenVPN security suggestion, does anyone know what I am suppose to do from that point on to get it working properly?
My Client configuration file:
client
dev tun
proto tcp
tls-client
remote <remote IP> 80
persist-key
persist-tun
ca /share/MD0_DATA/Download/vpn/ca.crt
tls-auth /share/MD0_DATA/Download/vpn/key.key
cert /share/MD0_DATA/Download/vpn/cert.crt
cipher AES-256-CBC
comp-lzo
auth-user-pass /share/MD0_DATA/Download/vpn/pass1.txt
auth-retry interact
script-security 3
log-append /share/MD0_DATA/Download/vpn/openvpn.log
verb 3
mute 20
keepalive 10 60
writepid /var/run/openvpn.client.pid
up /etc/openvpn/openvpn_up
down /etc/openvpn/openvpn_down
explicit-exit-notify 2
ifconfig-nowarn
auth-nocache