1

I have got this warning message on the System Management in a Proliant server ML350 G5.

Degraded Accelerator
Name    Value
Status: Temporarily Disabled
Error Code: Cache Disabled Low Batteries
Serial Number:  P9A3A0B9SX5023
Total Memory:   131072 KB
Read Cache: 50%
Write Cache:    50%
Battery Status: Failed
Read Errors:    0
Write Errors:   0

I order a new battery HP part number: 307132-001 (used battery but in good state). I replaced the battery according the instruction but after turn on the server the warning message is still in the System Management.

I have read that the battery takes time to charge, but I replaced the battery two days ago (around 50 hours).

Also I updated the server with this SPP (http://h17007.www1.hp.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx?version=2014.06.0) with the online mode (using the browser executing hpsum.bat).

The firmware of the Smart Array E200i is 1.86 (the latest).

What can I do at this point? May be the battery adquired would be in a bad state?

ewwhite
  • 194,921
  • 91
  • 434
  • 799
dlopezgonzalez
  • 185
  • 2
  • 13

1 Answers1

1

I think you purchased a bad battery.

But please see: Smart Array P400 - Accelerator Replacement Battery Failure

You could try a full power off of the system (removing power cables) and try again. But you've most likely acquired a bad battery.

Community
  • 1
ewwhite
  • 194,921
  • 91
  • 434
  • 799