I have VLAN 1 and VLAN 2 setup on HP ProCurve Switch, each linked to a different scope on DHCP server.
VLAN1 = 10.220.0.0/23
VLAN2 = 10.210.0.0/21
I can't ping VLAN1 devices from VLAN2 and vice versa. I have ip-routing enabled and have a default-gateway defined. Below is my route list's currently. Is there some config I'm missing here?
IP Route Entries
Destination Gateway VLAN Type Sub-Type Metric Dist.
------------------ --------------- ---- --------- ---------- ---------- -----
0.0.0.0/0 10.220.1.19 1 static 1 1
10.210.0.0/21 Voice 2 connected 1 0
10.220.0.0/23 Data 1 connected 1 0
127.0.0.0/8 reject static 0 0
127.0.0.1/32 lo0 connected 1 0
