Switch from E1 to Analog PSTN line on IP-PBX failure

Asked Jun 16 '14 at 13:04

Active Jun 16 '14 at 13:04

Viewed 152 times

I have two Asterisk servers,

When my e1 gateway is failed (ex. shutdown, no power...), PSTN automatically switch to analog lines

but when my IP-PBX is failed I want to make the gateway to route the call back to the PSTN again and there switch the call to an analog line.

asked Jun 16 '14 at 13:04

Hi, welcome to SF. What precisely is the question you are asking? – Felix Frank Jun 16 '14 at 13:25
which part of my question is not clear to you? – Mohammad Tahmasebi Jun 18 '14 at 09:34
1

There is no actual question. You only describe your target design. – Felix Frank Jun 18 '14 at 10:16
It seems that the question is: **HOW to make the gateway to route the call back to the PSTN again and there switch the call to an analog line?** – mammadalius Jun 22 '14 at 08:03

0 Answers0