I have a Sun Fire T2000 with up-to-date firmware, running Solaris 11.1.
I have inserted two SEAGATE-ST914602SSUN146G-0400-136.73GB HDDs in bays 2 and 3.
Both drives show OK in the ALOM and are visible to raidctl. However, the disk in bay 2 does not show up in the format tool, whilst the disk in bay 3 does.
Any suggestions as to how to make format see the drive?
ALOM:
Disk Status Service OK2RM
--------------------------------------------
HDD0 OK OFF OFF
HDD1 OK OFF OFF
HDD2 OK OFF OFF
HDD3 OK OFF OFF
Many thanks.
@jillagre:
svcs -xv devfsadm
svc:/system/devfsadm:default (hot-plug and synchronous device support service)
State: online since June 19, 2013 11:28:33 AM BST
See: man -M /usr/share/man -s 1M devfsadm
See: /var/svc/log/system-devfsadm:default.log
Impact: None.
@Sirch:
dsk/c2t2d0 is missing
cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c2 scsi-sas connected configured unknown
c2::dsk/c2t0d0 disk connected configured unknown
c2::dsk/c2t1d0 disk connected configured unknown
c2::dsk/c2t3d0 disk connected configured unknown
c3 scsi-bus connected configured unknown
c3::dsk/c3t0d0 CD-ROM connected configured unknown