We have HP Proliant ML330 G6 and its BIOS is closed with password. Password is already forgotten and we can't get there. Is there any way to crack or reset a password at this box?
Asked
Active
Viewed 9,972 times
2 Answers
13
Don't password-protect your BIOS... Maintenance nightmare.
To remedy this, you will need physical access to the server... You're going to be looking for a set of DIP switches on the motherboard:
- Remove the server cover.
- Locate the System Maintenance Switch, position 6, and move the switch to the "On=Clear NVRAM" position.
- Power the server back on until Power-On Self-Test begins.
- After POST has started, power-cycle the server off.
- Move the System Maintenance Switch back to the "Off" position.
![](../../users/profiles/13325.webp)
ewwhite
- 194,921
- 91
- 434
- 799
-
Thank you! Absolutely agree with you. It was not me, who set the password. – XOR Dec 15 '12 at 17:38
5
There's a set of switches on the motherboard, one of them is Password Override (ie Take any password, not just the right one)
System Maintenance SW1 - iLO Security (Password)
System Maintenance SW5 - BIOS Password Required
Note: The switches are present on almost every modern HP Server, and usually the same layout.
![](../../users/profiles/33417.webp)
Chris S
- 77,337
- 11
- 120
- 212