We have a server that is being used in production, but it was not originally meant to. The main thing I want to add to it is a Dell PERC S300 RAID Card to have the main hard drive (Windows Server 2008 R2) mirrored on another hard drive. I can not initialize the disk and wipe the the OS to create the array and then re-install. Is there a way to create the array with a current hard drive, without affecting it, and just mirroring the drive? If that card is not an option, is there a card that would allow that? The server is a Dell PowerEdge T110 II.
-
1Before you do anything, please for the love of god back your data up. – ErnieTheGeek Jun 28 '12 at 19:11
3 Answers
If you are looking to create a RAID 1 from an existing disc. The following procedure has worked for me.
- Use Acronis to clone the drive to another drive.
- Use Acronis to backup the drive as a recoverable image and store it on an external drive.
- Install the RAID card of choice.
- Install new drives or reuse the original with another drive.
- Create a RAID 1 on the drives.
- Use Acronis to restore the image we made in Step 2.
- Boot system on new RAID 1.
Steps 1 is critical if you choose to reuse the original drive in the array. IF anything goes wrong you will still have a copy of the OS you can simply put back in the system and continue as if nothing happened.
![](../../users/profiles/149587.webp)
- 71
- 7
We do not have a controller that supports what you are wanting to do. The SAS5/6, H200, and S100/S300 auto-initialize when an array is created. Any data on the drives would be deleted during this process.
The PERC 5/6 or H700/H710 may allow you to perform what you are wanting to do. It is not a supported function, so I am not sure of the exact outcome. It may still wipe the data, but you can try this.
Create a single drive RAID 0 with your current drive. Then install Openmanage Server Administrator in the operating system. Within OMSA is an option to reconfigure an array. It will allow you to reconfigure the RAID 0 drive to a RAID 1 array if there is another compatible drive present. It will then copy the contents from the original drive to the new drive.
I am not sure if the initial creation of a stripe/RAID 0 on the drive will make the data inaccessible or corrupt it. Just be sure that you do not select the option to initialize the array during this process.
Thanks
![](../../users/profiles/115393.webp)
- 26
- 2
With Windows 2008 you can do a baremetal recovery of the system, so backup sytem, reconfigure the RAID and to finish, with the Windows DVD boot the system and select recover a system from a backup.
![](../../users/profiles/110026.webp)
- 359
- 1
- 3