-1

With putty on Windows I added some tunnel for terminal service through ssh

6664 > 192.168.20.44:3389
6665 > 192.168.20.45:3389
6666 > 192.168.20.46:3389

So when I connect with client to 127.0.0.1:6664 it works...

Now I want to use localtest.me to select the machine directly without port number.

I want when I type foo.localtest.me in TS client to connect automaticaly on the 127.0.0.1:3389 is it possible or do I need a proxy to translate port regarding domain name.

Huygens
  • 1,678
  • 2
  • 19
  • 36
Christophe Debove
  • 51
  • 7

1 Answers1

1

Maybe it will be easier if you will just add and host entry for domain translation in windows hosts file
foo.localtest.me 192.168.20.46:3389 Please have a look here http://www.technoreply.com/simple-trick-to-use-ports-in-hosts-file/ .

Alex H
  • 1,814
  • 11
  • 18
  • I try to avoid to type the port number each time to select the distance machine. with you solution that is not a solution you just tell me type the port – Christophe Debove Jun 06 '12 at 10:13
  • I might be mistaken , but with TS you can save the session (and keep the port number there). If TS is the terminal service client . – Alex H Jun 06 '12 at 10:34
  • you right it keep session, I want to call a name, and not an ip adress, because I'have near 20 machine to access and I don't want to memorize the corespondance. – Christophe Debove Jun 06 '12 at 12:15
  • You can save the sessions under a meaningfull name , not by ip then you won't have to memorize them , or you could use a remote desktop organisor like mremote. – Alex H Jun 06 '12 at 13:18