0

We have a PFSENSE installation with a few physical interfaces defined:

192.168.1.0/24 - LAN
192.168.2.0/24 - WIFI
192.168.3.0/24 - SERVERS
10.61.88.0/23 - New Requirement..... read on

The new requirement has been laid out by a supplier, they require access to their equipment, which is all attached to a DrayTek Router/Firewall. The WAN interface of the Draytek is attached to the 10.61.88.254 interface in the PFSENSE machine, via a dedicated switch.

DHCP tells me the Draytek has pulled the 10.61.88.1 address which I reserved for it. But the NAT rule for https and http doesn't work (they work fine on the other networks). Am I missing something fundlemental?

Anyone got any ideas on troubleshooting the issue?

Stuart
  • 203
  • 1
  • 3
  • 11
  • 1
    picture of PFsense FW rules for the new network and picture of you nat rules would help – Ninja Feb 21 '12 at 13:19
  • I THINK I need to switch the New Requirement interface 'DIGI' to bridging mode, so it gives the external static IP to the Draytek router attached to the PFSENSE Interface. Any advice? – Stuart Feb 22 '12 at 09:32

1 Answers1

0

My approach was wrong, I setup the interface to bridge, works great.. PFSENSE Bridge on of the Network Interfaces

Community
  • 1
Stuart
  • 203
  • 1
  • 3
  • 11