I have configured a PPTP VPN on my PFSense 2.0 RC3 router. The internet traffic comes to my modem (10.0.0.0/24) and then through my router (192.168.100.0/24).
My PPTP subnet is 192.168.101.0/24. I am able to connect to it from my IPad but then, I can only ping my PPTP server (192.168.101.1) and the LAN interface (192.168.100.1). I can't ping anything on the internet (tried 8.8.8.8) or my LAN. My iPad is connected to the Wifi access point provided by my modem, simulating an internet access.
If I check the firewall log, I can see that the ICMP packet comming from my iPad (192.168.101.100) going to 192.168.100.110 is accepted. If I do a capture from my PFSense box, I can see 192.168.100.110 received the packet and replied, but my IPad never received the answer.
The only PPTP firewall rule I have is an allow for everything from everywhere. No other rules concerning PPTP is in the LAN or WAN rules.
My knowledge of network is average but I suspect a routing problem. I know my packets go from the internet through the modem, then to the pptdp0 interface of my router, then to my machine at 192.168.100.110. I know also that my machine answer, then the traffic go to the router, by seems to stop before the pptpd0 interface as I don't see this packet in my firewall log. The firewall allow every outgoing packet from my LAN interface, so the problem should be the route between the LAN interface and the pptpd0 interface.
Can someone suggest me a solution please?