I have a SAN with redundant cisco 2960s when I set it up a while ago I set all of the interfaces to use an MTU of 9000. I was looking at the config today and I noticed this line system mtu routing 1500
will that cause any problems? or because this is a switch everything should be fine because there isn't any routing.
Asked
Active
Viewed 574 times
1
Mike Pennington
- 8,266
- 9
- 41
- 86
Peter
- 1,102
- 3
- 18
- 32
-
I assume this is for iSCSI? Is jumbo frames enabled on the array and the servers? – mrdenny May 04 '11 at 19:10
1 Answers
0
Peter, you can rest safe knowing that system mtu routing 1500
only affects routed Vlans.
Mike Pennington
- 8,266
- 9
- 41
- 86