5

I have removed samba using :

apt-get --purge remove samba

and then Manually removed the smb.conf using rm *.* after going to the Samba directory.

Now While I trying to install Samba again I am getting the following error:

Starting Samba daemons: nmbd/usr/sbin/nmbd: /usr/local/lib/libldap_r-2.4.so.2: no version information available (required by /usr/sbin/nmbd)
/usr/sbin/nmbd: /usr/local/lib/liblber-2.4.so.2: no version information available (required by /usr/sbin/nmbd)
 failed!

I am unable understand why this is happening. Please help

Edit:
After trying ps aux | grep samba getting the follwing response:

root     25793  0.0  0.0   3088   716 pts/0    R+   09:17   0:00 grep samba

Have no idea what to do with this?

Edit@Matthew

Now Have the follwoing error: Processing triggers for man-db ...

Setting up samba-common (2:3.2.5-4lenny11) ...
Not replacing deleted config file /etc/samba/smb.conf
chmod: cannot access `/etc/samba/smb.conf': No such file or directory
dpkg: error processing samba-common (--configure):
 subprocess post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of samba:
 samba depends on samba-common (= 2:3.2.5-4lenny11); however:
  Package samba-common is not configured yet.
dpkg: error processing samba (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 samba-common
 samba
E: Sub-process /usr/bin/dpkg returned an error code (1)

I have already removed smb.cnf file

Simsons
  • 137
  • 1
  • 4
  • 12
  • In your question above, the output of the `ps aux | grep samba` command showed you one result, and that was the `grep samba` command you ran. If samba was running, you'd have another result listed there. – mistiry Aug 02 '10 at 14:52

5 Answers5

3

You have a incompatible shared library in /usr/local. That was installed separately, not as part of a Debian package (Debian packages are not allowed to install to /usr/local). You should remove it, and any other related shared libraries in /usr/local, uninstall all SAMBA packages, then reinstall

Note that the grep result means no process containing "samba" is executing. Only the grep is running; I know this looks a little confusing.

EDIT:

Okay, try:

sudo rm /usr/local/lib/libldap_r-2.4.so.2

This removes a shared library that was separately installed to /usr/local. You may have others there, but you removing the wrong ones could break your system.

sudo apt-get remove samba samba-common smbclient swat samba-doc smbfs libpam-smbpass libsmbclient libsmbclient-dev winbind

This removes all samba-related packages.

Now, reinstall what you need. E.g.:

sudo apt-get install samba

EDIT 2:

Nikolaidis is right. Manually removing all the SAMBA config files was a mistake. Do:

sudo cp /usr/share/samba/smb.conf /etc/samba/smb.conf
sudo dpkg --configure -a
Matthew Flaschen
  • 868
  • 2
  • 7
  • 11
  • Could you please provide the commands , I am complete newbie in Linux – Simsons Aug 02 '10 at 13:45
  • 1
    Deleting everything is not usually considered as good idea ! Try dpkg --configure -a to repair the .deb database and afterwards retry. Propably a force flag is what you need. – Nikolaidis Fotis Aug 02 '10 at 14:17
2

I guess it's because you uninstalled samba only and wiped out the config file so something stayed installed and without configuration.

I think there are ways to repair, but I would try to reinstall on a "clean" base doing:

sudo dpkg -P samba samba-common smbclient
sudo rm -f /etc/rc*.d/*samba /etc/init.d/samba

before anything and reinstall with sudo apt-get install samba

laurent
  • 2,035
  • 16
  • 13
1

try ps aux | grep samba. Did you stop the previous running instance of samba ?

Nikolaidis Fotis
  • 1,994
  • 11
  • 13
1

Try

ps aux | grep smbd

The process names you should expect to find when running Samba are smbd and nmbd, not samba.

You did run apt-get --purge remove samba to get rid of your previous Samba installation. But you did not tell which command you used to re-install Samba. So I can only guess where your real problem comes from, and what the possible solution is.

Should you want to install it from your official Debian software repositories, then use the following sequence:

  1. apt-get update (This brings your system's local knowledge about all currently available software packages up to date. This is important!)
  2. apt-get install samba smbclient (This does not only install Samba and the Samba client utils, but it also brings all 'dependencies' up to date.)

If this does not help, then run

  • dpkg --configure -a (This will try to repair a damaged SW package database.)

and repeat the apt-get install ... command. If this did not help, then run

  • dpkg --force-confmiss --configure samba (This will install missing config files)

and repeat the apt-get install ... command.

Kurt Pfeifle
  • 1,746
  • 2
  • 12
  • 19
1

I fixed my issue by running the following commands: 

sudo apt-get remove --purge samba-common
sudo apt-get remove --purge samba
sudo apt-get install samba
BE77Y
  • 2,577
  • 3
  • 17
  • 23
asterisk
  • 11
  • 1