4

Is it possible to check the temperature of the CPU and locally attached SATA/IDE HDDs under XenServer 5.6? Can I install lm-sensors?

Hubert Kario
  • 6,351
  • 6
  • 33
  • 65
netvope
  • 2,113
  • 5
  • 25
  • 35
  • 1
    +1 As I run XenServer on high-end desktop, not a "real" server, IPMI/BMC or ILO are completely out of the question. – Hubert Kario Oct 12 '10 at 18:34

3 Answers3

1

We use IPMI with a BMC controller to do hardware monitoring for our xenserver hosts. Depending on the type of hardware you have this might be an option.

rorr
  • 622
  • 4
  • 8
1

You might be able to use smartmontools for that. If those hard drives are in a RAID array, you may be able to pick up the SMART data through the controller. Be sure to check the "-d" option in the smartctl man page.

majorhayden
  • 576
  • 3
  • 5
1

smartmontools will do the job. It is however not trivial to install on XenServer. Here is a tutorial: http://www.schirmacher.de/display/INFO/Install+smartmontools+on+Citrix+XenServer .

Arne Schirmacher
  • 31
  • 1
  • 2
    I'm assuming that this is only an answer to the "hdd" part of the question. Is there a solution for checking CPU temperature? – Nanne May 15 '11 at 14:49