1

What is the I/O load on the local disk system for the host OS in XenServer? I can't find this info anywhere. As we have a SAN for the VMs themselves, can we get away with cheap controller / SATA disk in RAID-1 for the hypervisor? We won't boot from the SAN as it seems prone to problems.

Skyhawk
  • 14,149
  • 3
  • 52
  • 95

2 Answers2

2

I have never used XenServer as such, but in general, the host OS is not having to deal with disk IO much - some log writing, standard OS stuff, nothing else. The main load is on the SAN LUNs, where the working VMs are.

I have a few hosts with KVM (under RHEV) with very old 60Gb SATA drives, but a lot of CPU cores and RAM. I haven't checked exactly, but the local drives definitely do not seem to be a bottleneck, unless you're going into swap (and you never want to swap with several VMs operating)

dyasny
  • 18,482
  • 6
  • 48
  • 63
1

You can get away with the smallest oldest disc you can get your hands on. I would suggest a 16 / 32 gb SSD for maintenance reasons. Low power and makes no differnce to be cheap here.

TomTom
  • 50,857
  • 7
  • 52
  • 134