can I set the default GW to be the Link Local address of the next hop router. I understand this is a strange thing to do, I'm mostly wondering it is possible?
Asked
Active
Viewed 4,587 times
2 Answers
6
Yes, you can. I've done it without even knowing it, and it worked. Apple AirPort Extreme 802.11n Base Stations actually routinely advertise their LAN-side IPv6 link-local address via IPv6 Router Advertisement, and my clients use it and successfully reach v6-only sites like http://ipv6.google.com/ and the non-mosaic dancing kame at http://www.kame.net/. I didn't even notice that they were using the base station's IPv6 LL address for their default IPv6 gateway until much later.
![](../../users/profiles/36806.webp)
Spiff
- 2,496
- 16
- 17
4
It's perfectly valid. I use radvd on Linux to advertise my IPv6 subnet to my LAN, with a very basic config, and it actually advertises the router's link-local address by default. Never had problems with it.
![](../../users/profiles/9082.webp)
Martijn Heemels
- 7,438
- 6
- 39
- 62