I have a problem with bonding mode 802.3ad between Ubuntu 20.04.3 and switch aruba 6300m.
Any problems :
The bonding work fine but after a reboot i need to shut / no shut my lag on 6300M switch for "actualize" the bonding. After that it's work fine. (Only mode 802.3ad have this problem).
sudo netplan apply does not work. I need to reboot my server for apply configuration
Netplan conf :
network:
version: 2
renderer: networkd
ethernets:
ens3f0np0:
dhcp4: false
eno5np0:
dhcp4: false
bonds:
bond0:
interfaces: [ens3f0np0,eno5np0]
addresses: [MyIP]
gateway4: MyGateway
nameservers:
addresses: [MyDNS]
parameters:
mode: 802.3ad
lacp-rate: fast
mii-monitor-interval: 100
Conf LAG Aruba 6300M when it's works :
Aggregated-interfaces : 1/1/20 2/1/20
Aggregation-key : 25
Aggregate mode : active
Hash : l3-src-dst
LACP rate : fast
Speed : 20000 Mb/s
Mode : access
Conf LAG Aruba 6300M When ubuntu was reboot :
State information : Disabled by LACP or LAG
Type : normal
Aggregated-interfaces : 1/1/20 2/1/20
Aggregation-key : 25
Aggregate mode : active
Hash : l3-src-dst
LACP rate : fast
Speed : 0 Mb/s
Mode : access
if I shut / no shut lag or make aggregate mode passive to active it's works.
can you help me please, i think i have a problem with my netplan configuration
Sudo netplan try :
bond0: reverting custom parameters for bridges and bonds is not supported
Please carefully review the configuration and use 'netplan apply' directly.
