since I need to copy some data from an old HP DL380 server, I decided to power on it after a long time. Unfortunately, I can't mount the RAID5 logical volume that is containing the data I need.
So, in order to better investigate, I started using HPACUCLI tool and I noticed that the logical drive #1 is not available (but hard disks are ok). Do you know what does it mean and how I can fix it (if I can fix it...).
Many thanks in advance. Mauro
[root@dl380 ~]# hpacucli HP Array Configuration Utility CLI 9.20.9.0 Detecting Controllers...Done. Type "help" for a list of supported commands. Type "exit" to close the console.
=> ctrl all show config
Smart Array P410i in Slot 0 (Embedded) (sn: 500143801862EA40)
array A (SAS, Unused Space: 0 MB)
logicaldrive 1 (279.4 GB, RAID 1, OK)
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 300 GB, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 300 GB, OK)
SEP (Vendor ID PMCSIERA, Model SRC 8x6G) 250 (WWID: 500143801862EA4F)
Smart Array P411 in Slot 2 (sn: PACCTID12081FLZ)
array A (SATA, Unused Space: 0 MB)
logicaldrive 1 (30.0 TB, RAID 5, Not Available)
physicaldrive 1E:1:1 (port 1E:box 1:bay 1, SATA, 3 TB, OK)
physicaldrive 1E:1:2 (port 1E:box 1:bay 2, SATA, 3 TB, OK)
physicaldrive 1E:1:3 (port 1E:box 1:bay 3, SATA, 3 TB, OK)
physicaldrive 1E:1:4 (port 1E:box 1:bay 4, SATA, 3 TB, OK)
physicaldrive 1E:1:5 (port 1E:box 1:bay 5, SATA, 3 TB, OK)
physicaldrive 1E:1:6 (port 1E:box 1:bay 6, SATA, 3 TB, OK)
physicaldrive 1E:1:7 (port 1E:box 1:bay 7, SATA, 3 TB, OK)
physicaldrive 1E:1:8 (port 1E:box 1:bay 8, SATA, 3 TB, OK)
physicaldrive 1E:1:9 (port 1E:box 1:bay 9, SATA, 3 TB, OK)
physicaldrive 1E:1:10 (port 1E:box 1:bay 10, SATA, 3 TB, OK)
physicaldrive 1E:1:11 (port 1E:box 1:bay 11, SATA, 3 TB, OK)
physicaldrive 1E:1:12 (port 1E:box 1:bay 12, SATA, 3 TB, OK)
