I have a home network, with a ZyXel NAS drive. On this network, 2 Windows 10 PCs can access various shares, including on the NAS. But one Windows 10 Pro PC, cannot access any network shares.
If I issue a Net use command:
C:\Users\Mario>net use P: \\nasdevice\share
System error 67 has occurred.
The network name cannot be found.
When using Explorer, I get the message:
Network Error
Windows cannot access \\nasdevice\share
Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose.
[Expanded Information]
Error code: 0x80004005
Unspecified error
Network error share cannot access 0x80004005
I see no additional information in the event logs.
I can however ping the NAS device, and access it's web browser control panel from the problematic PC.
I have tried the following:
Insured the NAS share is accessible from other computers
Applied all current Windows updates.
Turned off Windows Firewall (and back on)
Turned on SMB 1.0/CIFS Client in features
Turned off SMB 1.0/CIFS Client in features
Insured that SMB Direct was enabled in Features
Turned on Network Discovery
Turned on file and printer sharing (don't think that's needed, but I did)
Even enabled the 'Enable insecure guest logons' in Group Policy
Rebooted numerous times
Set all these services to automatic startup:
- Function Discovery Provider Host (was manual)
- Function Discovery Resource Publication (was Manual triggered)
- SSDP Discovery
- UPnP Device Host
- TCP/IP NetBIOS Helper
In Control Panel > Network and Internet > Network and Sharing Center, Change adapter settings, I changed Internet Protocol Version 4 (TCP/IPv4) > Advanced > Enable NetBIOS over TCP/IP on the WINS (checked).
So now I'm ready to toss this and reinstall Windows 10, except that I know it will take a complete day to reinstall my software and preferences.
Any ideas?
Additional Info on 10/27/2021
Thank you for your replies.
- Both the working PC and the non-working PC have the same time.
- Trying the \ip\Sharename also does not work.
The network is all on a Netgear R6230 router. Devices use DHCP, which is provided by the Netgear router.
The IP address range is 10.0.0.x, the problem workstation is 10.0.0.25, a working workstation is 10.0.0.36, and the NAS device is 10.0.0.31. The DNS is setup through DHCP, which comes from that NetGear router, so the device is pingable by its name from all devices.
"nslookup nasdevice" reveals the same on all machines (working or not): server: www.routerlogin.com Address: 10.0.0.1 *** www.routerlogin.com can't find nasdevice: Non-existant domain
But again, all 3 PCs can ping by the NAS by name, but only 1 PC can't access the share.
