Static route between 2 routers

Asked Sep 10 '20 at 07:39

Active Sep 10 '20 at 07:44

Viewed 37 times

Hello I have problem with static routing between 2 simple (Zyxel and TPLink) routers. vDSL Router 1 has 192.168.0.1/25 with enabled DHCP and Router 2 has 10.0.0.1/25 also with DHCP

Router 1 and Router 2 are connected with cat5e. From ethernet port 3 (Router1) to WAN port on Router 2.

I want to connect from PC1 to small server (nVidia Jetson). As far as know i should make static route on router 1.

My routing settings on Router1:

As far I know, the settings "should" be correct. But I can't ping from PC1 to any IP that are in 10.0.0.0/25 subnet.

Can anyone help me, or just point me to the right direction?

Thanks

Network map:

Static route settings

edited Sep 10 '20 at 07:44

asked Sep 10 '20 at 07:39

Adam Kenny Šmíd

Your Router 2 most probably blocks all incoming packages on the WAN interface. You will need co configure it to allow incoming connections. – Gerald Schneider Sep 10 '20 at 07:44
Thanks I will try – Adam Kenny Šmíd Sep 10 '20 at 07:44
I am still stuck, u point me to the right direction, but i tried 2 different routers (netis, tp-link) and tried different settings. There is no good firewall option to be disabled, there is no firewall settings at all... Where should i set it? Port forwarding? Routing? – Adam Kenny Šmíd Sep 10 '20 at 10:27
From PC1-4, can you ping 192.168.0.3 (I assume the WAN interface of R2)? – Ron Trunk Sep 10 '20 at 13:10
yes, ping from PC1-4 to R2 WAN works – Adam Kenny Šmíd Sep 10 '20 at 13:24
and from R2 (and clients) i can access to 192.168.0.1 and also to the internet. – Adam Kenny Šmíd Sep 10 '20 at 14:09
Your router 2 is probably trying to do NAT on the WAN interface. You need to turn off NAT on router 2. – Michael Hampton Sep 17 '20 at 13:46

Static route between 2 routers

0 Answers0