Introduction

prerequisite only

  1. jMMpXwVwoP2ropdP
    jMMpXwVwoP2ropdP
    XBqOSiL2cTksWSds
    • Use the flat end of a spudger to flip the front-facing camera out of its socket in the display assembly.

    • There is a small amount of adhesive securing the camera module to its socket, but this should not take very much force. Use the spudger to get in between the black plastic of the camera module and the black plastic of the camera socket and separate them.

    My camera ceased to work after this. Anybody have the same issue?

    JavierDiaz4 -

    A reboot can sometimes work. Once the camera is seen not to be working (say it was connected after the device goes to sleep), the iPod gives up trying to show any live images from the either front or rear cameras

    mark -

    How do you replace the front facing camera

    brandon landry -

    I have a similar issue, the rear camera doesn't work and the facing camera sometimes works but very slow...everything else works well.

    Any ideas on how to fix this problem?

    carlos lima -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

Member since: 17/10/09

502341 Reputation

0 comments