iPad 2 Wi-Fi EMC 2415 Home Button Replacement

Written By: Andrew Optimus Goldheart
  • Comments: 0
iPad 2 Wi-Fi EMC 2415 Home Button Replacement

Difficulty

Moderate

Steps

1

Time Required

No estimate

Introduction

This guide is a prereq only. Used to install transferred home button.

  1. J3NRrBjpVP5g6244
    J3NRrBjpVP5g6244
    JFjTVWZHZOVKIbJH
    GxlGYWdAr1EkX1o2

    • Carefully grasp the home button with a pair of tweezers.

    • Gently lower and place the home button into the round opening located at the bottom of the front panel.

    • The correct orientation of the home button is shown in the third picture. Make sure the back of the home button is face up and the flat portion of the inner home button circle is oriented to the top of the iPad.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Andrew Optimus Goldheart

Member since: 17/10/09

502341 Reputation

0 comments