iPad 2 GSM LCD Assembly Replacement

Written By: Andrew Optimus Goldheart
  • Comments: 0
iPad 2 GSM LCD Assembly Replacement

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

Internal guide for removing LCD before logic board.

  1. BRWEPCUOZ6LbDSvG
    BRWEPCUOZ6LbDSvG
    eR3RbLqUO3xM1dBF
    SPqwB1QFd11ZNryT

    • Carefully lay the LCD next to the rear panel.

    • Use a plastic opening tool to lift the display data cable lock upwards.

    • Pull the display data cable out of its socket.

    • Do not pull the connector upward as you disconnect it from its socket.

  2. ymKOVi64SDTaSNYc

    • Remove the LCD assembly from the rear panel assembly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Andrew Optimus Goldheart

Member since: 17/10/09

502341 Reputation

0 comments