iMac Intel 27" EMC 2546 RAM Replacement

Written By: Andrew Optimus Goldheart
  • Comments: 0
iMac Intel 27" EMC 2546 RAM Replacement

Difficulty

Difficult

Steps

2

Time Required

No estimate

Introduction

  1. K1Ur2AlJf1d5C4ED
    K1Ur2AlJf1d5C4ED
    oddwnSPAlmiXOJbG
    rEeti2VQbKrcYcsM

    • The RAM tray is locked into its closed position with two grey tabs.

    • Use your thumbs or index fingers to unlock the tray by pushing the tabs outward, away from the RAM.

    • Pull the tabs out and up, swinging the RAM tray up to a near-vertical position.

  2. YmcaehpFuavfS5cS
    YmcaehpFuavfS5cS
    hm1R1RShNiNoTZtF
    mQPQPlH1LmvBjCSZ

    • Remove a stick of RAM by grabbing it with two hands and pulling straight out of the RAM tray.

    • Remove any remaining sticks of RAM.

    • RAM modules are keyed, so that they can only be installed in the proper orientation. Ensure that the RAM module's notch lines up with the socket's notch when installing new modules.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Andrew Optimus Goldheart

Member since: 17/10/09

502341 Reputation

0 comments