Introduction

  1. BIwEdEjDpsldPfaf
    • Remove two 3.7 mm T5 screws from the back of the logic board.

  2. VL2xMQtTGUWFfRDc
    VL2xMQtTGUWFfRDc
    ZLmadnXS2bNwbPYS
    tUylrGIdMNSeppPC
    • To avoid damaging its socket, do not lift the end of the AirPort/Bluetooth Card excessively.

    • Lift the end of the AirPort/Bluetooth Card up slightly and pull it straight out of its socket on the logic board.

    • When reinstalling the card, be sure it is properly seated before reinstalling its retaining screw.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

Member since: 17/10/09

502341 Reputation

0 comments