Samsung Galaxy S10e Screen Disconnect Prereq

Written By: Arthur Shi
  • Comments: 1
Samsung Galaxy S10e Screen Disconnect Prereq

Difficulty

Moderate

Steps

1

Time Required

No estimate

Introduction

This is a prerequisite guide! This guide is part of another procedure and is not meant to be used alone.

Display connector disconnect for the Samsung Galaxy S10e.

  1. tMHIOPUe3HLCH2fN
    tMHIOPUe3HLCH2fN
    WNkUVETX15SlTNJP

    • Use the flat end of a spudger to pry up and disconnect the screen connector from its motherboard socket.

    • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

    The blue L-pick is there for picking up the connectors! Not the black glue-scratcher/puncher! Follow this manual if you want to destroy your phone.

    Someone fromjapan -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Arthur Shi

Member since: 03/01/18

248651 Reputation

0 comments