NeuTab Air7 Speaker Replacement

Written By: Jason Soares
  • Comments: 0
NeuTab Air7 Speaker Replacement

Difficulty

Moderate

Steps

3

Time Required

7 minutes

Introduction

The speaker is responsible for the audio outputs of the device. Issues with this component can range from distorted audio, to poor quality audio in general, to even total failure to function. Being such a core component to daily operations, it is imperative to ensure successful installation of any new speaker. In order to perform successful replacement of the component, follow this guide.

  1. fLgLLxQc3T4KkHW5
    fLgLLxQc3T4KkHW5
    gq1kWWqrx5vE13bV
    Uwre1J5BSn2FyACR

    • Ensure your device is powered off before you begin.

    • Use the opening tool to gently pry the back cover off of the tablet, running it along the perimeter of the device.

  2. NS4fMuTKbORLqfip
    NS4fMuTKbORLqfip
    CAZxrAKeIbGJ2r3b

    • The following instructions require soldiering, which can risk burn injuries as well as component damage for those novice in the skill. Tread with caution.

    • For a guide on how to solder, click here.

    • De-solder the red and black wire ends that connect the speaker to the motherboard.

  3. A4hkvHrX2KuoZean
    A4hkvHrX2KuoZean
    IcJNTIFxw42TYdQu
    meSaaRd3YutU22mH

    • Use a Phillips #00 screwdriver to remove the two 0.8 mm screws holding the cover of the speaker in place.

    • Remove the cover and the speaker.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jason Soares

Member since: 29/10/23

532 Reputation

0 comments