MacBook Pro 15" Unibody Early 2011 Battery Replacement

Written By: Andrew Optimus Goldheart
  • Comments: 1
MacBook Pro 15" Unibody Early 2011 Battery Replacement

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

  1. KUtrMnRaL54ZFsKI

    • Remove the two 7.5 mm ( 7.2 mm )Tri-point screws securing the battery to the upper case.

  2. swmAEiAmYAsRVOCT

    • Carefully peel the battery warning label off the upper case between the battery and the optical drive to reveal an additional Tri-point screw.

    • Remove the last 7.5 mm ( 7.2 mm ) Tri-point screw securing the battery to the upper case.

    • Do not remove the label from the battery.

  3. HdcbUE2apDuvIowA

    • Use the attached plastic pull tab to remove the battery from the upper case.

    No large piece of tape on my computer board.

    cvmiller21 -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Andrew Optimus Goldheart

Member since: 17/10/09

502341 Reputation

0 comments