Logitech G602 Motherboard Replacement

Written By: Jerico Morales
  • Comments: 6
Logitech G602 Motherboard Replacement

Difficulty

Easy

Steps

9

Time Required

5 - 10 minutes

Introduction

This guide will teach you how to fully deconstruct the mouse and remove the green motherboard.

  1. FmcaheYED1RSqFLO
    FmcaheYED1RSqFLO
    HFvEA6rscQsjI5TO
    K5GhyPjNbWGE1Dmj

    • Use a spudger to pry off all 4 mouse feet from under the mouse.

  2. CKthugLNnLOGWTfI
    CKthugLNnLOGWTfI
    QBkLtpSrSJC6edPj
    DvDXLc6CgxoLxJH4

    • Use a Phillips #00 screwdriver to unscrew all 6 screws (3x5mm) from under the mouse feet.

  3. HUjtJCrpW5UcukZF
    HUjtJCrpW5UcukZF
    HWK5aKrNLRBlBEgL

    • Use the blue spudger to prop open the battery port.

  4. fUZa6nBeJ6PWQNdu

    • Remove the two AA batteries from the device.

  5. poJseUVyQPnrVAjh
    poJseUVyQPnrVAjh
    NCHplXhyCEKr15OP

    • Lift the top of the mouse from the base of the mouse (separate mouse in half) to expose the mouse’s internal hardware.

  6. ltFMJZ6V2dXnZ1Fd
    ltFMJZ6V2dXnZ1Fd
    x1iEPimNkB3cOBVF

    • Use tweezers to grip and detach the white ribbon cable from the motherboard.

  7. VRfgLFKw4U5OfSA1

    • Use pliers to detach the white plug from the motherboard.

  8. tC4CZyxZQUitBgY1
    tC4CZyxZQUitBgY1
    NXnRdUaNFBoxWgaY
    aKpSNGMcYiByFUtP

    • Use a Phillips #00 screwdriver to unscrew all 5 screws (3x5mm ) from the battery pack and motherboard.

  9. 55tEdHUgVkAO4GMf

    • Remove the motherboard from the mouse.

    This tells me how to take it out but not fixing it.

    DaBoothAnator -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jerico Morales

Member since: 17/01/18

1219 Reputation

5 comments

So can I buy a new motherboard? Where? I don’t see one available on this site.

Kat -

Hi there Kat. Did you eventually find out where to get a new motherboard for your G602 mouse?

Luke Haasbroek -

Jerico, I’ve got a problem with my g602, as the mouse is depleting new batteries energy. I put new batteries on, and they are immediately recognized as “low batteries” by the mouse system, flashing the led indicator as low battery as well. Any thoughts?

Cristian Pereverzieff -

I'm having the same problem. Where you able to fix the problem?

Christopher Flynn -

Completed successfully.

The hardest part was to find a spare mainboard.

Brendan -