Introduction

Use this guide to disconnect the battery in your MacBook Pro 13" 2022.

  1. MLesCrdxYCfEJgCd
    MLesCrdxYCfEJgCd
    DULy5mtfFQAeo34T
    • Use blunt noise tweezers or your fingers to peel and remove the cover from the battery board, just above the middle battery cell.

  2. djKmHALNFbNqlmNu
    djKmHALNFbNqlmNu
    PReLk2QetgDSIcGi
    • Use blunt nose tweezers to gently peel back the pull tab covering the battery data connector.

    • Don't remove or tear the pull tab, as it's attached to the head of the connector.

  3. UGJWjJYILha4fPq3
    UGJWjJYILha4fPq3
    TAoMyDaI4LVFjf4S
    • Use the point of a spudger to flip up the small locking tab securing the battery data connector.

    • Locking tabs on ZIF connectors are fragile—be gentle with your spudger.

  4. XPNKXSPTH6XONurY
    XPNKXSPTH6XONurY
    QT4O2PQjklnOKaOq
    tBiZIq2FwprSY1LV
    • Use blunt nose tweezers or your fingers to grab the battery data cable pull tab and slide it straight out of its socket.

    • Move the cable to the left, out of the way of the battery board.

    • Don't strain the cable, as it's still attached to the battery board.

  5. hUPr6omhrEWEurAS
    • Use a T5 Torx driver to remove the 3.7 mm screw securing the battery connector.

  6. uPklZIZh6pdRR6Bl
    uPklZIZh6pdRR6Bl
    mvKuKVSu3fVAGCOY
    lVG4JZRDUGmhYH4Q
    • Use the flat end of your spudger to slightly lift the battery connector away from the battery board.

    • Lifting the connector too high will break it. Angle it enough so it won't accidentally contact the battery board during repair.

    • Optionally, you may insert a barrier, such as a piece of a playing card, between the connector and the board during the repair.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Clay Eickemeyer

Member since: 19/09/22

65190 Reputation

0 comments