Introduction

This repair guide was authored by the iFixit staff and hasn’t been endorsed by Google. Learn more about our repair guides here.

Follow this guide to replace the graphite sheet in your Google Pixel 8 Pro.

  1. dQZgBOZ4LtK5tuHY
    dQZgBOZ4LtK5tuHY
    BZdbNJBqJvTbvnW2
    NxCBFywMiD1FKCCI
    • Before applying the new graphite sheet, it's helpful to see how it will be oriented on your phone.

    • Hold the graphite sheet so the clear liner is on the bottom and place it over your phone to find the proper alignment.

    • The sections of the graphite sheet with three flaps will go over the rear camera assembly.

  2. vIsSrAVQdFgmPDn1
    • Remove the larger clear liner from the back of the sheet to expose the adhesive.

  3. KVV2PTthQGvGrW3O
    KVV2PTthQGvGrW3O
    JLkBs2EKZYuEqYFY
    msnY12YHRSS1AQcj
    • Be very careful during this step! Once the graphite sheet sticks to your phone, you won't be able to reposition it. You'll have to start over with a new sheet if it gets applied incorrectly.

    • Gently place the top edge of the sheet onto the frame. Use the frame's lip to help position the sheet.

    • Carefully lay the rest of the sheet onto your phone.

  4. bOCHvb3sqFdlovDX
    bOCHvb3sqFdlovDX
    utByLyj4RPHbuqll
    FEhnXwdRJU4ljwH5
    • The sheet needs to be firmly secured to your phone before removing any liners to prevent it from pulling up and misaligning in the next step.

    • Use your fingers to firmly press down and secure the graphite sheet to your phone.

    • You can also use a plastic card such as a credit card to secure the sheet.

  5. aKLJG2KlFoGdSny6
    aKLJG2KlFoGdSny6
    CqDRaikfVMBgdYZD
    rOInkaMv5kEGSlqJ
    • Gently peel up and remove the remaining blue liner.

    • If any part of the sheet starts to peel up with the liner, gently lay it back on the frame and use your fingers to secure it.

Conclusion

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Spencer Day

Member since: 14/09/22

49372 Reputation

0 comments