Google Pixel 7 Pro Screen (prereq)

Written By: Arthur Shi

Difficulty

Moderate

Steps

Time Required

No estimate

Introduction

This is a prerequisite guide! This guide is part of another procedure and isn't meant to be used alone.

Single step for removing the screen

Separate the screen from the phone assembly.
During reassembly:
Check that all screws are tightened and there are no loose parts.
Reconnect the screen and test your phone to make sure it works. Power it back down and continue reassembly.
Apply new adhesive where it's necessary after cleaning the relevant areas with isopropyl alcohol (>90%).
Follow this guide if you're using custom-cut adhesives for your device.
Follow this guide in case you're using a pre-cut adhesive card.
During the boot-up process after reassembly, the screen will go through a calibration sequence. Do not touch the screen during this process, as it could result in improper touch calibration and create touch issues.