Introduction
Prerequisite guide to remove the motherboard. Used for motherboard, camera, and display assembly guides.
Tools
-
-
Use tweezers to remove the adhesive foam tape from the top of the digitizer cable ZIF socket.
-
-
-
Use the tip of a spudger to flip open the tab on the digitizer ZIF connector.
-
Use tweezers to pull the digitizer cable away from its socket on the motherboard.
-
-
-
Remove the three 2.5 mm Phillips #000 screws securing the motherboard to the display assembly.
-
-
-
Use the tip of a spudger to disconnect the display data cable from the back of the motherboard.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
If you´re replacing the screen you don´t need to disconnect the antenna cable. You can take apart the motherboard, the doughterboard and tha cable together.
Pacarlas -
Well, I actually broke the socket. Does anyone know if it can be fixed?
thanks
Yoel Schouten Moral -
I broke it too, what to do now?
jakob -
What is the thing left of the camera, below the CC \n TC logo printed on the board?
Luther Blisset -
Yep, no need to remove the antenna connectors if you're replacing the display.
Smorgasbord -