Introduction

Use this guide to remove or replace the back cover on your Dell Latitude 7490 laptop.

  1. NcTiMBuYfW2cSSrR
    • Flip your laptop over so the rubber feet strips are facing up.

  2. gj3hyTxJVLb3n3ux
    gj3hyTxJVLb3n3ux
    XwSng1PvSHoWwP5p
    • Use a Phillips screwdriver to fully loosen the eight captive screws securing the back cover.

  3. BsC3oIpopaQDQcON
    BsC3oIpopaQDQcON
    pANaxGFhRHT1dFcj
    1HavHh64px6L2sg3
    • Plastic clips secure the back cover to the frame. You'll hear and feel them release as you work.

    • Insert the long side of an opening pick between the top right corner of the back cover and frame.

    • Pry the back cover up to release the clips securing the top right corner.

  4. oxqS61jibxnAdhth
    oxqS61jibxnAdhth
    tUmEATLiqUUNtYYW
    Zq51LW5mCBtFKmTF
    • Slide the opening pick down the right edge and around the bottom right corner to release the clips.

  5. sZRF3JmgpPdwarJA
    sZRF3JmgpPdwarJA
    spUpebP2lSEFYbyq
    ijAcmIoxgTvABmoH
    • Slide the opening pick along the front edge and up to the top left corner to release the remaining clips securing the back cover.

  6. 34H5a1DYHpRGT1Oj
    34H5a1DYHpRGT1Oj
    u214Yu31dPTxLsJt
    lwHMcKKeFflBgNJo
    • Remove the back cover.

    • During reassembly, lay the back cover on the frame and press down firmly around the perimeter to engage all the clips.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Spencer Day

Member since: 14/09/22

49372 Reputation

0 comments